최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기ETRI journal, v.27 no.1, 2005년, pp.122 - 125
Kim, Jin-Tae (Basic Research Laboratory, ETRI) , Choi, Choon-Gi (Basic Research Laboratory, ETRI) , Sung, Hee-Kyung (Basic Research Laboratory, ETRI)
A polymer-based planar-lightwave-circuit-type variable optical attenuator (VOA) was fabricated using a hot embossing process. With an optimized one-step embossing process, forty micro-channels for the guidance of light were defined on a polymer thin film with an accuracy of 주제어
Eldada, L., Shacklette, L.W.. Advances in polymer integrated optics. IEEE journal on selected topics in quantum electronics : a publication of the IEEE Communications Society, vol.6, no.1, 54-68.
Noh, Y.O., Yang, M.-S., Won, Y.H., Hwang, W.-Y.. PLC-type variable optical attenuator operated at low electrical power. Electronics letters, vol.36, no.24, 2032-2033.
Neyer, A., Knoche, T., Muller, L.. Fabrication of low loss polymer waveguides using injection moulding technology. Electronics letters, vol.29, no.4, 399-401.
Choon-Gi Choi, Sang-Pil Han, Byeong Cheol Kim, Seung-Ho Ahn, Myung-Yung Jeong. Fabrication of large-core 1 x 16 optical power splitters in polymers using hot-embossing process. IEEE photonics technology letters : a publication of the IEEE Laser and Electro-optics Society, vol.15, no.6, 825-827.
Heckele, M., Bacher, W., Müller, K. D.. Hot embossing - The molding technique for plastic microstructures. Microsystem technologies : sensors, actuators, systems integration, vol.4, no.3, 122-124.
Jin Tae Kim, Keun Byoung Yoon, Choon-Gi Choi. Passive alignment method of polymer PLC devices by using a hot embossing technique. IEEE photonics technology letters : a publication of the IEEE Laser and Electro-optics Society, vol.16, no.7, 1664-1666.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.