최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기멤브레인 = Membrane Journal, v.15 no.4, 2005년, pp.289 - 296
최정환 ((주) 원일티엔아이) , 이정빈 ((주) 원일티엔아이) , 김인철 (한국화학연구원 분리막 다기능소재연구센터)
In the MBR process, the membrane fouling occurs seriously on the membrane surface. In general, the membrane fouling is attributed to factors such as deposition or adhesion of sludge floc. The occurrence of fouling is a main cause of a decrease in membrane module fluk. At this study, our MBR membrane...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
S. H. Choi, N. U. Cho, and M. Y. Han, 'The Estimating of Rapid Increase to a Membrane in the Intermittent Aeration MBR Process using Alum Treatment', Membrane J., 15, 70 (2005)
T. M. Tak and T. H. Bae, 'Effect of Biomass Concentration and Sludge Loading Rate on Bioactivity and Membrane Fouling in a Submerged Membrane Bioreactor system', Membrane J., 14, 289 (2004)
Y. Shimizu, 'Filtration characteristics of hollow fiber microfiltration membranes used in membrane bioreactor for domestic wastewater treatment', Water Res., 30, 238 (1996)
A. G. Fane, 'Membranes for water production and wastewater reuse', Desalination, 106, 1 (1996)
H. Kishino, H. Ishida, H. lwabu, and I. Nakao, 'Domestic wastewater reuse using a submerged membrane bioreactor', Desalination, 106, 115 (1996)
M. Bodzek, Z. Debkowska, E. Lobos, and K. Konieczny, Biomembrane 'wastewater treatment by activated sludge method', Desalination, 107, 83, (1996)
T. Ueda, K. Hata, and Y. Kikuoka, 'Effects of aeration on suction pressure in a submerged membrane bioreactor', Water Res., 31, 489 (1997)
※ AI-Helper는 부적절한 답변을 할 수 있습니다.