최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.22 no.2 = no.167, 2005년, pp.23 - 29
유영은 (한국기계연구원 지능형정밀기계연구부) , 서영호 (한국기계연구원 지능형정밀기계연구부) , 제태진 (한국기계연구원 지능형정밀기계연구부) , 최두선 (한국기계연구원 지능형정밀기계연구부)
초록이 없습니다.
H.,Schift, C., David, M.,Gabriel, J., Gobrecht, L.J., Heyderman, W., Kaiser, S., Koppel and L., Scandella, 'Nanoreplication in polymers using hot embossing and injection molding,' Microelectronic Engineering, Vol. 53, pp. 171-174, 2000
Yu, Liyong, Koh, Chee Guan, Lee, L. James and Koelling Kurt W., 'Experimental Investigation and Numerical Simulation of Injection Molding with Micro-Features,' Polymer Engineering and Science, Vol. 42, pp. 871-888, 2002
Yu, Liyong, Lee, L. James and Koelling Kurt W, 'Flow and Heat Transfer Simulation of Thin-Wall Injeciton Molding with Microstructures,' SPE ANTEC 2003, pp. 602-606, 2003
Kari, Monkkonen, Joni, Hietala, Pertti, Paakkonen, Esko, J. Paakkonen, Terho, Kaikuranta, Tuula T. Pakkanen and Timo, Jaaskelainen , 'Replication of sub-Micron Features Using Amorphous Thermoplastics,' Polymer Engineering and Science, Vol. 42, pp. 1600-1608, 2002
Yoo, Yeong-Eun, Park, Sihwan, Moon, Jong Shin and Lee, Shi-Ho,' Influence of the shear heating on measuring the viscosity of the polymer melt using slit die rheometer,' 2002 KSME Fall Conference, 2002
Yoo, Yeong-Eun, Park, Sihwan and Lee, Shi-Ho, 'Improving the aesthetics and the mechanical properties of injection molded parts using a mold with high temperature,' SPE Automotive TPO Global Conference 2002
Yao, D. and Kim B, 'Rapid Thermal Response Molding for Cycle Time Reduction,' SPE ANTEC 2003, pp. 607-611, 2003
Iwame, Hiroyuki, Fukuoka, Masayoshi, Ohno, Yuzo, Kanayama, Hiroyuki, 'An Advanced Cavity/Core System Mold for Ultra-Low Pressure Injection Molding-'ULPAC MOLD',', SPE ANTEC 2003, pp. 468-472, 2003
Kim, Dong-hak, Kang, Myung-ho, Chun, Y.H, 'Development of a New Injection Molding Techonology : Momentary Mold Surface Heating Process,' Journal of Injection Molding Technology, Dec, 2001
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.