최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.22 no.4 = no.169, 2005년, pp.27 - 36
권신 (한국과학기술원 기계공학과) , 남성호 (생산기술연구원 나노가공팀) , 양민양 (한국과학기술원 기계공학과)
Some studies have shown that unstable factors are inherent in WEDM process, causing the instability of the discharging pulse to reach about 40∼60% in normal machining. Transient stability is an important subject in WEDM process since there is a close relationship between stability and machining perf...
Ho, K. H., Newman, S. T., Rahimifard, S. and Allen, R. D., 'State of the Art in Wire Electrical Discharge Machining (WEDM),' Int. J. of Machine Tools & Manufacture, Vol. 44, pp. 1247 - 1259, 2004
Kwon, S. and Yang, M. Y., 'Benefits of Using Instantaneous Energy to Monitor the Transient State of the Wire EDM Process,' Int. J. of Advanced Manufacturing Technology, In print, 2004
Kinoshita, N., 'Control of Wire-EDM Preventing Electrode from Breaking,' Annals of the CIRP, Vol. 31, No. 1, pp. 111 - 114, 1982
Liao, Y. S. and Woo, J. C., 'Design of a Fuzzy Controller for the Adaptive Control of WEDM Process,' Int. J. of Machine Tools & Manufacture, Vol. 40, pp. 2293 - 2307, 2000
Rajurkar, K. P. and Wang, W. M., 'On-Line Monitor and Control for Wire Breakage in WEDM,' Annals of the CIRP, Vol. 40, No. 1, pp. 219 - 222, 1991
Chae, H. J. and Lee, S. Y., 'Vibration Characteristics and Tension of a Wire in WEDM,' Journal of the KSPE, Vol. 18, No. 11, pp. 86-92, 2001
Seong, J. K., Kang, M. C. and Hwang, K. H., 'Characteristics of Machinability and Operating Condition in Wire-Cut EDM of Die Material,' Proceedings of the KSPE Conference, pp. 14-18, April 1996
Cho, S. S. and Oh, J. H., 'Influence of Current Waveform on Anode Erosion in Wire Electric Discharge Machining,' Journal of the KSPE, Vol. 18, No. 7, pp. 127-133, 2001
※ AI-Helper는 부적절한 답변을 할 수 있습니다.