최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.22 no.4 = no.169, 2005년, pp.144 - 150
한성렬 (부경대학교 기계공학부 대학원) , 박태원 (창원기능대학) , 정영득 (부경대학교 기계공학부)
Gas-assisted injection molding (GAIM) process is reducing the injection pressure during mold filling required as well as the shrinkage and warpage of the part and cycle time. Despite of these advantages, this process introduces new parameters and makes the application more difficult because the proc...
Shah, S., 'Gas assisted injection molding: a technology overview,' J. Injection Molding Technol. 1 (2), pp. 96-100, 1997
Barton, K. S. and Turng, L. S., 'General design guidelines for gas-assisted injection molding using a CAE tool,' ANTEC Technical Paper, pp. 421-425, 1994
Lee, S. H. and Son, J., 'Optimization of nano machining parameters using acoustic emission and the Taguchi method,' J. of KSPE, Vol. 21, No. 3, pp. 163-170, 2004
Kwak, J. S. and Ha, M. K., 'Optimization of Grinding Conditions and Prediction of Surface Roughness Using Taguchi Experimental Design,' J. of KSPE, Vol. 21, No. 7, PP. 37-45, 2004
Beaumont, J. P., Young, Jack H., 'Mold Filling Imbalances in Geometrically Balanced Runner System,' Journal of Injection Molding Technology, Vol 1, No.3, pp. 133-143, 1997
Je, D. G. and Jeong, Y. D., 'Filling Imbalance in 3 Plate Type Injection Molds with Multi-Cavity,' J. of KSPE, Vol. 21, No.6, pp. 117-121, 2004
※ AI-Helper는 부적절한 답변을 할 수 있습니다.