최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.22 no.5 = no.170, 2005년, pp.159 - 166
박천홍 (한국기계연구원 공작기계그룹) , 이영준 (금오공대 대학원 기계공학과) , 홍성욱 (금오공대 기전공학과) , 이후상 (한국기계연구원 공작기계그룹)
A self-compensated water-hydrostatic bearing is well known to have advantages in stiffness. In this paper, its concept is extended to a hydrostatic journal bearing for achieving higher stiffness. The finite element method is applied to analyze the load characteristics of the self-compensated hydrost...
Tully, N., 'Static and Dynamic Performance of an Infinite Stiffness Hydrostatic Thrust Bearing,' Trans. ASME, Jr. of Lub. Tech., January, pp. 106-112, 1977
Singh, N., Sharma, S. C., Jain, S. C. and Reddy, S. S., 'Performance of membrane compensated multirecess hydrostatic/hybrid flexible journal bearing system considering various recess shapes,' Tribology International, Vol. 37, pp. 11-24, 2004
Morsi, S. A., 'Passively and Actively Controlled Externally Pressurized Oil Film Bearings,' Trans. ASME, Jr. of Lub. Tech., January, pp. 56-63, 1972
Umino, K., 'Performance of Toyoda STAT Bearing,' Toyoda Technical Reports, Vol. 11, No.4, pp. 1-8, 1970
Slocum, A. H., Scagnetti, P. A., Kane, N. R. and Brunner, C., 'Design of self-compensated water-hydrostatic bearings,' Precision Engineering, Vol. 17, pp. 173-185, 1995
Reddi, M. M., 'Finite-Element Solution of the Incompressible Lubrication Problem,' Trans. ASME, Jr. of Lub. Tech., July, pp. 524-, 1969
Sukida, K., 'Application of Finite Element Method to Machine Tools,' Toyoda Technical Reports, Vol. 13, No. 3, pp. 10-19, 1972
Park, C. H., Chung, J. H., Lee, H. and Kim, S. T., 'Finite Element Analysis on the Motion Accuracy of Hydrostatic Table(1st. Analysis and Experimental Verification on Single-side Table),' J. of KSPE, Vol. 17, No. 12, pp.137-144, 2000
※ AI-Helper는 부적절한 답변을 할 수 있습니다.