최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國海洋工學會誌 = Journal of ocean engineering and technology, v.19 no.1 = no.62, 2005년, pp.33 - 38
이주성 (울산대학교 조선해양공학부) , 임동용 (울산대학교 조선해양공학부)
It has been well documented that plate forming is one of the most important processes in shipbuilding. In the most shipyards, the line heating method is primarily used for plate forming. Since the heating process is carried out for the curved plate and not for the flat plate, a curvature effect on t...
이박인,류희승, 변구근, 김학곤 (2002). '열간가공에 의한 강판 의 곡가공 자동화 시스템' 대한조선학회논문집, 제139권, 제2 호, pp 34-43
이주성 (2003). '강판의 곡가공 자동화를 위한 수치제어 시스템 의 개발'. 한국해양공학회지, 제17권, 제1호, pp 72-79
Lee, J.S. (1996). 'Development of the Automatic Marking Generation System for the Plate Forming by Line Heating', Journal of Ship Production, SNAME, Vol 12, No 4, pp 247-253
Moshaiov, A. and Latorre, R. (1985). 'Temperature Distribution During Plate Bending by Torch Flame Heating', Joumal of Ship Research, SNAME, Vol 29, No 1, pp 1-11
Shin, J.G. and Moshaiov, A. (1991). 'Modified Strip Model for Analyzing the Line Heating Method', Journal of Ship Research, SNAME, Vol 35, No 2, pp 172-182
Tsuji, I. and Okumura, Y. (1975). 'A Study on Litle Heating Process for Plate Bending of Ship Steels', Journal of Society of Naval Architecture of Seibu, Vol 76, pp 149-160
Veda, Y, Murakawa, H., Rashwan, A.M., Ishiyama, M., Murakawa, H., and Ogawa, J. (1993). 'Development of Computer Aided Process Planing System for Plate Bending by Line Heating(4th Report)', Journal of the Society of Naval Architects of Japan, Vol 173, pp 683-695
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.