최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.14 no.2 = no.74, 2005년, pp.147 - 152
김현수 (부산대학교 정밀기계공학과) , 김병민 (부산대학교 정밀정형및금형가공연구소) , 조형호 (한국생산기술연구원 나노소재연구팀) , 조훈 (한국생산기술연구원 나노소재연구팀)
The objective of this study is to develop an optimal drawing die for the clad wire drawing process. Cu-clad wire, which has the advantages of the high strength of a steel core and the electro-conductivity, corrosion resistance of a copper layer, is widely being used in the field of the telecommunica...
K. Yoshida, 1997, Technology of manufacture and application on clad, Journal of the JSTP, vol.38, no.441, pp. 45-47
H. Dyja, J. W. Pilarczyk, W. Szulc, Z. Smolarczyk, Drawing of bimetal wires-draw stresses and wires properties
Z. Muskalski, J. W. Pilarczyk, S. Wiewiorowska, B. Golis, September 2001, Modelling the drawing of bimetallic rods with Forge-2 software, Wire Journal Interantional, pp .108-112
W. Szulc, M. Pietrzyk, H, Dyja, J. W. Pilarczyk, 1994, Theoretical and experimental analysis of drawing of steel rods covered with copper, JMPT, vol.45, pp. 401-406
H. Dyja, B. Garbarz, R. Molenda, 1982, Examination of the regions of the joint of sheets bonded by expolsive welding technique, Hutnik, vol. 49, p. 9
B. Avitzur, Aug 1970, The production of Bi-metal Wire, The Wire Journal, vol.3, No.8, pp. 42-49
D. H. Sansome, H. T. Chia, 1980, The drawing of bi-metal combination-tube on rod', Wire Industry, No. 6, pp. 519-522
박동인, 김병민, 오상수, 2004, 유한요소법에 의한 Bi2223 고온 초전도 선재의 다심 인발에 대한 연구, 한국소성가공학회, 제13권, 제1호
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.