최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國眞空學會誌 = Journal of the Korean Vacuum Society, v.15 no.5, 2006년, pp.475 - 484
인상렬 (한국원자력연구소 핵융합연구랩) , 윤병주 (한국원자력연구소 핵융합연구랩)
The deformation, the stress distribution, and the contact pressure of gaskets used in sealing flanges of CF (Con-Flat) or IPD (Improved) type were calculated to investigate the possibility of analyzing and estimatimg the sealing performance under a given tightening condition for a specific flange sy...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
A. Roth, Vacuum Sealing Techniques, Pergamon Press, 1966
W.R. Wheeler and M. Carlson, Ultra-high vacuum flanges, Natl. Sym. Vacuum Technol. Trans. 1961, 1309(1962)
I. Sasaki, H. Ishimaru, G. Horikoshi, Sealing concept of elastic metal gasket Helicoflex, Vacuum 32, 33(1982)
K. Obara et al., A study for the improvement on knife-edge metal-seal flange, Jap. J. Vac. Soc. 32, 2(1989)
K.M. Welch et al., Metal and elastomer seal tests for accelerator applications, Vacuum 41, 1924(1990)
S. Kurokouchi, S. Morita and S. Morita, Characteristics of a taper-seal type gasket for the Conflat sealing system, J. Vac. Sci. Technol. A19, 2963(2001)
T. Wikberg and E. Dodelin, FEM calculation of UHV all-metal demountable joints for LEP, CERN-LEP-VA/89-49, 1989
R.B. Fleming, R.W. Brocker and D.H. Mullaney, Development of bakeable seals for large noncircular ports on the TFTR, J. Vac. Sci. Technol. 17, 337(1980)
A. Roth, The influence of the surface roughness on the specific leak rate of the gasket seals, Vacuum 20, 431(1970)
S. Kurokouchi, et al., Reconsideration on ConFlat seal mechanism by gasket deformation measurements (in Japanese), J. Vac. Soc. Jpn. 42, 910(1999)
※ AI-Helper는 부적절한 답변을 할 수 있습니다.