선택한 단어 수는 입니다.
최소 단어 이상 선택하여야 합니다.
최소 단어 이상 선택하여야 합니다.
선택한 단어 수는 30입니다.
최대 10 단어까지만 선택 가능합니다.
최대 10 단어까지만 선택 가능합니다.
제안 방법
- The average diameter of the crystals was estimated using Scherrer's formula. TEM experiments and corresponding electron diffraction (ED) were carried out on a JEOL JEM2010 transmission electron microscope operated at 200 kV, and EDS was performed with an EDAX X-ray energy-dispersive analysis system attached to the JEOL JEM2010 transmission electron microscope. TEM samples were prepared on the 400 mesh copper grid coated with carbon.
- The second is how to assemble the nanoparticles into ordered one-dimensional, two-dimensional, or three-dimensional spatial configurations, and many techniques have been used to prepare ordered structure of nanoparticles, including LB technique,13 selfassembly technique,14 electrophoretic deposition15 and magnetophoretic deposition.16 The third is the characterization of the nanoparticles and their assembly, and usually UV-vis, FT-IR, XRD, TGA/DAT, zeta potential, XPS, TEM, SEM, AFM, STM were used. Especially, the magnetic properties of magnetic nanoparticles and their assembly were characterized by Mössbauer spectra, magnetization curve, ferromagnetic resonance (FMR),17 magnetoresistance (R(H)), and EPR.
대상 데이터
- All the chemicals, including FeCl2·4H2O(99+%), FeCl3·6H2O (99+%), sodium oleate (98%), CHCl3 (HPLC grade) and CH3COCH3 (HPLC grade), were obtained from Aldrich Chemical Co. and used without further purification. Distilled water was passed through a six-cartridge Barnstead Nanopure II purification train consisting of Macropure pretreatment and deoxygenated by bubbling with N2 gas for 1 h prior to the use, and the main synthetic steps were carried out under a N2 gas atmosphere.
- TEM experiments and corresponding electron diffraction (ED) were carried out on a JEOL JEM2010 transmission electron microscope operated at 200 kV, and EDS was performed with an EDAX X-ray energy-dispersive analysis system attached to the JEOL JEM2010 transmission electron microscope. TEM samples were prepared on the 400 mesh copper grid coated with carbon. A drop of the nanoparticle solution was carefully placed on the grid and dried in air.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.