최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기엘라스토머 = Elastomer, v.41 no.2, 2006년, pp.97 - 107
계형산 (목원대학교 응용화학공학과) , 신경철 (충주대학교 고분자공학과) , 방대석 (금오공과대학교 고분자공학전공)
The recycled polyethylene composites with various ratio of ground waste tire powder were manufactured by using a fully intermeshing co-rotating twin screw extruder for the reuse of waste tire scrap. In this investigation, the ground waste tire powders (GWTP) were blended with virgin HDPE and recycle...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
T. S. Hwang and J. W. Park, 'Preparation of Composite with Reinforced Tire Waste Chip and Effect of Various Matrices on Mechanical Properties', Korean Solid Wastes Engineering Society, 17(3), 305 (2000)
T. S. Hwang, S. G. Lee, and K. S. Cha, 'Fabrication and Mechanical Properties of the Hybrid Composites Filled with Waste Stone and Tire Powders', Polymer (Korea), 25(6), 774 (2001)
KOTMA Journal, 'Achievements of Waste Tire Recycling on 2004 and its Plan on 2005', 39(1), 64 (2005)
J. K. Kim, 'Recycling Technologies for Scrap Waste Tires', Elastomer, 28(3), 205 (1993)
J. L. Park, C. H. Cho, and S. K. Lee, 'A Study on GRT/HDPE Composite for Reuse of Waste Tire (I)', Korean Solid Wastes Engineering Society, 13(6), 699 (1996)
J. K. Kim, H. N. Cho, and S. K. Lee, 'Effect of the Binder Content on the Recycling of Scrap Waste Tires', Journal of the Korea Institute of Rubber Industry, 29(5), 431 (1994)
R. K. Mantan, 'Rubber Engineering', ed. by Indian Rubber Institute, p. 821, McGraw-Hill, 1998
C. Sirisinha, P. Sae-oui, J. Guaysomboom, 'Mechanical Properties, Oil Resistance, and Thermal Aging Properties in Chlorinated Polyethylene/Natural Rubber Blends', Journal of Applied Polymer Science, 84, 22 (2002)
C. Keith Riew, 'Rubber-Toughened Plastics', ed. by American Chemical Society, p. 225, 1989
P. Rajalingam and W. E. Baker, 'The Role of Functional Polymers in Ground Rubber Tire-Polyethylene Composite', Rubber Chemistry & Technology, 65, 908 (1992)
J. S. Kim, S. J. Kim, K. C. An, S. Lim, D. H. Kim, and C. Han, 'The Effect of Additives in Waste Tire/Plastic Composites Using Internal Mixer', Polymer (Korea), 27(6), 562 (2003)
S. C. Kim, 'Polymer Engineering I', pp. 304-309, Scitech Media, 1994
S. C. Kim, 'Polymer Engineering II', pp. 247-293, Scitech Media, 1997
T. W. Yoo, B. H. Park, and C. H. Choi, 'Development of Thermoplastic Polyolefins for Bumper Cover: 2. Effect of Rubber Viscosity', Polymer (Korea), 20(5), 805 (1996)
※ AI-Helper는 부적절한 답변을 할 수 있습니다.