$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

가스터빈 냉각 베인에서 감온액정을 이용한 과도적 열전달 특성에 관한 실험적 연구
An Experimental Study on Transient Heat Transfer Characteristics of Gas Turbine Cooled Vane by Using Liquid Crystal Thermography 원문보기

한국마린엔지니어링학회지 = Journal of the Korean Society of Marine Engineering, v.30 no.1, 2006년, pp.22 - 29  

서남규 (경남대학교 대학원 기계과) ,  장태현 (경남대학교 기계자동화공학부)

Abstract AI-Helper 아이콘AI-Helper

Gas turbine engine among Principal internal combustion engines has been mainly applied as an aero and industrial Power plant. In order to increase its thermal efficiency. it has been raised their pressure ratio of compressor and the turbine inlet temperature. To operate above the limit temperature o...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

문제 정의

  • 따라서 열전달 계수를 정확히 예측함으로 터빈의 열응력 해석, 열 변형 방지 및 엔진 내구성 설계를 할 수 있으며 터빈 설계를 검증할 수 있다. 본 연구는 가스터빈의 냉각 베인의 열전달 특성을 감온 액정을 사용하는 실험적인 방법으로 냉각 베인의 설계 내용을 검증하고자 한다.

가설 설정

  • 감온액정의 두께는 무시할 수 있을 정도로 얇으며, 모든 면에 걸쳐서 일정하다.
  • 감온액정을 통한 온도 구배는 무시할 수 있다. 이는 실험 면과 감온액정 사이의 온도가 감온액정과 공기 사이의 온도와 같다고 가정됨을 의미한다.
  • 공기의 온도는 경계층 외부에서 측정되므로 경계층내에서의 온도 구배는 공기의 온도측정에 영향을 미치지 않는다.
  • ② 감온액정을 통한 온도 구배는 무시할 수 있다. 이는 실험 면과 감온액정 사이의 온도가 감온액정과 공기 사이의 온도와 같다고 가정됨을 의미한다.
본문요약 정보가 도움이 되었나요?

참고문헌 (17)

  1. Bunker, R. S., and D. E. Metzger, 'Local Heat Transfer in Internally Cooled Turbine Airfoil Leading Edge Regions: Part I,' Transactions of the ASME, Vol. 112, July, pp. 451-458, 1990 

  2. Bunker, R. S., and D. E. Metzger, 'Local Heat Transfer in Internally Cooled Turbine Airfoil Leading Edge Regions: Part II,' Transactions of the ASME, Vol. 112. July, pp. 459-466, 1990 

  3. VanFossen, G. J., 'Heat Transfer Coefficients for Staggered of Short Pin Fins,' Transactions of the ASME, Vol. 104, April 1982. pp. 268-274 

  4. Brigham, B. A., and VanFossen, G. J., 'Length to Diameter Ratio and Row Number Effects in Short Pin Fin Heat Transfer,' Transactions of the ASME, Vol. 106, January, pp. 241-245, 1984 

  5. Metzger, D. E., Berry, R. A., and Bronson, J. P., 'Developing Heat Transfer in Rectangular Ducts With Staggered Arrays of Short Pin Fins,' Transactions of the ASME, Vol. 104, November, pp. 700-706, 1982 

  6. Metzger, D. E., Fan, C. S., and Haley, S. W., 'Effects of Pin Shape and Array Orientation on Heat Transfer and Pressure Loss in Pin Fin Arrays,' Transactions of the ASME, Vol. 106, January, pp. 252-257, 1984 

  7. M. E. Taslim and T. Li, 'Measurements of Heat Transfer Coefficients and Friction Factors in Passages Rib-Roughened on All Walls,' Transactions of the ASME, Vol. 120, July, pp. 564-570, 1998 

  8. Cooper, T. E., Field, R. J., and Meyer, J. F., 'Liquid Crystal Thermog- raphy and Its Application to the Study of Convective Heat Transfer, 'ASME Journal of Heat Transfer, Vol. 97, Aug. pp. 442-450, 1975 

  9. 서남규, 산업용 소형 가스터빈 기술개발에 관한 연구(5차년도 최종보고서), 통산산업부 과학기술처, 제1권, pp. 147-171, 1997 

  10. 서남규, 산업용 소형 가스터빈 기술개발에 관한 연구(5차년도 최종보고서, 가스터빈설계 기초 연구), 통산산업부 과학기술처, 제3권, pp. 117-139, 1997 

  11. Hippensteels, S. A., Russell, L. M., F. S., 'Evaluation of a Method for Heat Transfer Measurements and Thermal Visualization Using a Composite of a Heater Element and Liquid Crystals,' Transactions of the ASME, Vol. 105, February, pp. 184-189, 1983 

  12. Hippensteels, S. A., Russell, L. M., Stepka F. S., 'Evaluation of a Method for Heat Transfer Measurements and Thermal Visualization Using a Composite of a Heater Element and Liquid Crystals,' NASA TM 81639, Apr., 1981 

  13. Lock, G. D., 'Transient Heat Transfer Measurements Using Thermochromic Liquid Crystal,' International Journal of Heat and Fluid Flow, 24, pp 23-28, 2003 

  14. F. B. Hilderbrand, Advanced Calculus for Applications, Prentice-Hall, Inc., 1963 

  15. Dennis G. Zill, and Michael R. Cullen, Advanced Engineering Mathematics. PWS Publishing Co. 1996 

  16. William Tyrrell Thomson, Laplace Transformation, Prentice-Hall. Inc., 1960 

  17. Arpaci Vedat S., Conduction Heat Transfer, Addison-Wesley, 1966 

저자의 다른 논문 :

관련 콘텐츠

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로