최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회논문집 = Transactions of the Korean society of machine tool engineers, v.15 no.3, 2006년, pp.17 - 23
정태형 (한양대학교 기계공학과) , 문창기 (한양대학교 대학원 기계설계학과) , 하영욱 (한양대학교 대학원 기계설계학과)
The strength estimation is carried out for injection molded plastic stepped gear. The stepped gear is considered as a plate model which is fixed by two edges and freed on the other sides. The stress of common normal gear is calculated by Lewis formula which can be derived quite simply from the equat...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Pye, R. G. W., 1989, Injection Mold Design, 4th ed, John Wiely & Sons, Inc., New York, pp. 3-254
Dudley, D. W., 1984, Handbook of Practical Gear Design, McGraw-Hill Book Company, pp. 3.128-3.135
Clifford E M. Dekker, 1980, Plastics gearing : selection and application, pp. 129-184
Chong, T. H., Moon, C. K. and Ha, Y. W., 2004, 'Strength Estimation of Injection Molded Plastic Stepped Spur Gear,' Proceedings of 2004 Autumn Conference, KSMTE, pp. 92-97
Polyplastic co., 1988, Plastic Gear, pp. 71
Engineering Polymers, 2000, General Principles for DuPont Engineering Polymers
Hachmann H., 1966, Konstruktion, pp. 11-14
Rees D. W. A, The mechanics of solids and structures, McGraw-Hill
※ AI-Helper는 부적절한 답변을 할 수 있습니다.