$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

수학적 섭동법을 이용한 저널과 스러스트가 연성된 유체 동압 베어링의 동특성 계수 해석
Determination of the Dynamic Coefficients of the Coupled Journal and Thrust Bearings by the Perturbation Method 원문보기

한국소음진동공학회논문집 = Transactions of the Korean society for noise and vibration engineering, v.16 no.7 = no.112, 2006년, pp.746 - 753  

이상훈 (한양대학교 기계공학부) ,  장건희 (한양대학교 기계공학부)

Abstract AI-Helper 아이콘AI-Helper

This paper proposes a method to calculate the stiffness and the damping coefficients of the coupled journal and thrust bearings. The Reynolds equations and their perturbation equations are transformed to the finite element equations by considering the continuity of pressure and flow at the interface...

주제어

참고문헌 (10)

  1. Lund, J. W. and Thomsen, K. K., 1978, 'A Calculation Method and Data for the Dynamic Coefficients of Oil-lubricated Journal Bearings' , Topics in Fluid Journal Bearing and Rotor Bearing System, ASME, New York, pp. 1- 28 

  2. Jang, G. H. and Kim, Y. J., 1999, 'Calculation of Dynamic Coefficients in a Hydrodynamic Bearing Considering Five Degrees of Freedom for a General Rotor-bearing System,' ASME J. Tribol., Vol. 121, pp, 499 - 505 

  3. Zheng, T., and Hasebe, N., 2000, 'Calculation of Equilibrium Position and Dynamic Coefficients of a Journal Bearing Using Free Boundary Theory' , ASME J. Tribol, Vol. 122, pp. 616 - 621 

  4. Zirkelback, N., and San Andres, L., 1998, 'Finite Element Analysis of Herringbone Groove Journal Bearings: A Parametric Study,' ASME J. Tribol., Vol. 120, pp. 234-240 

  5. Zang, Y. and Hatch, M. R., 1995, 'Analysis of Coupled Journal and Thrust Hydrodynamic Bearing Using Finite Volume Method,' ASME AISPS, pp. 71 - 79 

  6. Rahman, M. and Leuthold, J., 1996, 'Computer Simulation of a Coupled Journal and Thrust Hydrodynamic Bearing Using a Finiteelement Method' , Proceedings of 25th Annual IMCSD Symposium, pp. 103 -112 

  7. Oh, S. M. and Rhim, Y. C. 2001, ' The Numerical Analysis of Spindle Motor Bearing Composed of Herringbone Groove Journal and Spiral Groove Thrust Bearing,' KSTLE International Journal, Vol. 2, pp. 93 -102 

  8. Jang, G. H, Lee, S. H. and Kim, H. W., 2006, 'Finite Element Analysis of the Coupled Journal and Thrust Bearing in a Computer Hard Disk Drive' , ASME J. Tribol., Vol. 128, pp. 335 - 340 

  9. Kim, H. K., Lee, S. H. and Jang, G. H., 2005, 'Finite Element Analysis of a Coupled Hydrodynamic Journal and Thrust Bearing in a Computer Hard Disk Drive' , Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 15, No. 1, pp. 87 - 95 

  10. Hamrock, B. J., 1994, 'Fundamentals of Fluid Film Lubrication' , McGraw-Hili, New York 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

FREE

Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로