최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.15 no.2 = no.83, 2006년, pp.153 - 157
배종구 (포항공과대학교 신소재공학과) , 양요셉 (포항공과대학교 신소재공학과) , 반덕영 (고려강선(주) 기술 연구소) , 박찬경 (포항공과대학교 신소재공학과)
In this study, the die design and die series on the surface residual stress of cold drawn eutectoid steel wire have been investigated. Test pieces were fabricated using die series with different mean and final reduction ratios. Surface residual stresses in the axial direction were measured by X-ray ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
M. Dollar, I. M. Bernstein, A. W. Thompson, M.Shemenski, 1988, Influence of Deformation Substructure on Flow and Fracture of Fully Pearlitic Steel, Acta Metall., Vol. 36, pp. 311-320
M. Shemenski, 1999, Wire Drawing by Computer Simulation, Wire J. Int., Vol. 45, pp. 24-33
L. Lazarptto, 1997, Identification of Coulom's Friction Coefficient in Real Contact Conditions Applied to a Wire Drawing Process, Wear, Vol. 221, pp. 54-63
N. Vemlata, P. M. Dixit, G. K .Lal, 1995, Die Design for Asymmetric Extrusion, J. Mater. Proc. Technology, Vol. 55, pp. 331-339
G. Celano, 2001, The Application of Al Techniques in the Optimal Design of Multi-Pass Cold Drawing Process, J. Mater. Proc. Technology, Vol. 113, pp. 680-685
R. N. Wright, 1979, Mechanical Analysis and Die Desing, Wire J. Int., Vol. 25, pp. 47-59
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.