최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Advanced composite materials : the official journal of the Japan Society of Composite Materials and the Korea Society for Composite Materials, v.16 no.2, 2007년, pp.95 - 113
Iwahori, Yutaka (Composite Technology Center, Japan Aerospace Exploration Agency) , Ishikawa, Takashi (Aviation Program Group, Japan Aerospace Exploration Agency) , Watanabe, Naoyuki (Department of Aerospace Engineering, Faculty of System Design, Tokyo Metropolitan University) , Ito, Akira (School of Science and Technology, Meiji University) , Hayashi, Yoichi (Composite Technology Center, Japan Aerospace Exploration Agency) , Sugimoto, Sunao (Composite Technology Center, Japan Aerospace Exploration Agency)
Experimental investigations of interlaminar mechanical properties for carbon fiber reinforced plastic (CFRP) laminates were carried out using aramid fiber (
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Y. Tada and T. Ishikawa, Experimental evaluation of the effects of stitching on CFRP laminate specimens with various shapes and locations, Key Engng Mater. 37, 305-316 (1989)
Y. Tada and T. Ishikawa, Stitching effect upon strength of composite laminates, in: Proc. 7th US-Japan Conf. Compos. Mater., pp. 295-302 (1995)
Y. Iwahori and T. Ishikawa et al., Open hole compression fatigue test of stitched CFRP laminates, in: Proc. 9th US-Japan Conf. Compos. Mater., pp. 761-768 (2000)
S. Horikawa et al., in: Proc. 8th Japan Internat. SAMPE Sympos., pp. 509-512 (2003)
Y. Tanzawa, N. Watanabe and T. Ishikawa, Interlaminar fracture toughness of 3-D orthogonal interlocked fabric composites, Compos. Sci. Technol. 59, 1261-1270 (1999)
N. Watanabe and N. Nishii, FEM simulation of DCB test for stitched CFRP laminates, in: Proc. 41st AIAA SDM Conf., Report No. 2000-1616 (2000)
Y. Iwahori, Y. Ishikawa, Y. Hayashi and N. Watanabe, Study of interlaminar fracture toughness improvement on stitched CFRP laminates, Japan Soc. Compos. Mater. 26, 90-100 (2000)
S. C. Dai,W. Yan, H. Y. Liu and Y.W. Mai, Experimental study on Z-pin bridging law by pullout test, Compos. Sci. Technol. 64, 2451-2457 (2004)
W. Yan, H. Y. Liu and Y. W. Mai, Mode II delamination toughness of Z-pinned laminates, Compos. Sci. Technol. 64, 1937-1945 (2004)
P. Robinson and S. Das, Mode I DCB testing of composite laminates reinforced with Z-direction pins: a simple model for the investigation of data reduction strategies, Engng Fract. Mech. 71, 345-364 (2004)
Y. Iwahori, S. Sugimoto, T. Kato and T. Ishikawa, Mechanism of interlaminar strength improvement for CFRP laminates by stitching, in: Proc. 26th Internat. SAMPE Europe, pp. 171-176 (2005)
T. Ishikawa, Y. Iwahori, Y. Aoki, S. Takeda and H. Kikukawa, Research for composites strength evolution technology fabricated by new consolidation method, Japan Soc. Aeronaut. Space Sci. 53, 92-97 (2005)
M. Matsushima, T. Ishikawa and Y. Hayashi, Experimental Investigation of Interlaminar Fracture Toughness of Carbon Fiber/Thermoplastic and Carbon Fiber/Thermosetting Composites by DCB Specimens, Kobayashi, S., National Aerospace Laboratory report, TR-1096 (1991)
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.