최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.16 no.1 = no.91, 2007년, pp.3 - 8
최성현 (서울산업대학교 대학원) , 민형기 (서울산업대학교 대학원) , 류민영 (서울산업대학교 금형설계학과)
Novel compression molding system for preform has been developed in this study. The preforms for injection blow molding and injection stretch blow molding are being manufactured by injection molding. However it contains gate mark that affects the bottom crack in the PET bottle. The compression molded...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Min-Young Lyu, H. C. Kim, J. S. Lee, H. C. Shin, Youlee Pew, 2001, Causes of Cracks in Pataloid Bottom of Carbonated PET Bottle, International Polymer Processing, 16, pp. 72-78
Min-Young Lyu, H. C. Kim, H. C. Shin, J. S. Lee, S. T. Joo, Y. W. Kim, 2001, A Study on the Bottom Design of Petaloid Carbonated PET Bottle to Prevent Bottom Crack, SPE ANTEC Technical Papers, 47, 2808
Min-Young Lyu, Yong Hwan Kim, 2002, Investigation of Design Parameters and Novel Design of Petaloid PET Bottles, International Polymer Processing, Vol. 17, No.3, pp. 279-283
Min-Young Lyu, Youlee Pae, 2003, Bottom Design of Carbonated Soft Drink Polyethylene Terephthalate Bottle to Prevent Solvent Cracking, J of Applied Polymer Science, Vol. 88, pp. 1145-1152
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.