최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.16 no.1 = no.91, 2007년, pp.36 - 41
한성렬 (부경대학교 기계공학부 대학원) , 김준형 ((주)화승R&A 기술연구소) , 전승경 ((주)화승R&A 기술연구소) , 정영득 (부경대학교 기계공학부)
Thermoplastic elastomer(TPE) can be recycled and molded such as commercial thermoplastic. Therefore TPE has being widely applied on automobile, household and etc. in these days. This study shows the variation of mechanical properties and shrinkage on TPE moldings for variation of injection molding c...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
A. Mitsuo, 2003, Thermoplastic elastomer, Kog-yo Chosakai Publishing Co., Ltd., pp. 13-15
D. Weng, J. Andries, P. Morin, K. Saunders, J. Politis, 2000, Fundamental and material development for thermoplastic elastomer(TPE) overmolding, Journal of Injection Molding Technology, Vol. 4, No.1, pp. 22-28
K. Naskar, J. W. M. Noordermeer, 2006, Dynamically vulcanized PP/EPDM blends: Effects of multifunctional peroxides of crosslinking agents, ANTEC 2004, pp. 4202-4219
S. R. Han, Y. D. Jeong, 2006, Mechanical properties of elastomer TPVs due to injection molding conditions, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 5, No.1, pp. 27-32
J. Yun, R. Patel, D. C. Worley II, 2004, High performance thermoplastic vulcanizates(TPVs) for long term temperature application, ANTEC 2004, pp.4172-4176
A. Y. Coran, B. Das, R. Patel, 1978, US Patent 4, 104,210
A. Y. Coran, R. Patel, 1981, US Patent 4.271,049
K. Jayaraman, P. Papworthe, C. Shu, M.D. Wolkowicz, 2002, Analysis of tiger striping in injection molded TPO, ANTEC 2002
B. Ohlsson, H. Hassander, , Blends and thermoplastic interpenetrating polymer networks of polypropylene and polystyrene-block-poly(ethylene-stat-butylene)-block-polystyrene triblock copolymer. 1: Morphology and structure-related properties, Polymer engineering & Science, Vol. 36, Issue 4, pp. 501-510
W. Zoetelife, M. Teeuwen, 2003, Mechanical behavior of TPV in automotive sealing systems, ANTEC 2003, pp. 2496-2500
K. B. Kim, 2004, The tensile strength according to molding shrinkage for polycarbonates injection molding, M.S. thesis, Pukyong National University, pp.30-40
Korea plastic information center, 2001, The series of book for entrance to a plastics industry-Easy understanding rubber and elastomer, Korea plastic information center press, pp. 89-112
S. H. Park, 2004, Shrinkage behavior on the various shape of polycarbonate injection molding, M. Sc. thesis, Pukyong National University, pp. 37-38
Y. S. Choi, 2004, A study on shrinkage behavior according to injection molding process, Ph.D. thesis, Pukyong National University, pp. 68-69
A. B. Strong, 1996, Plastics: Materials and Processing, Prentice-Hall, Inc., pp. 239-242
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.