최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국세라믹학회지 = Journal of the Korean Ceramic Society, v.44 no.2 = no.297, 2007년, pp.79 - 83
Paek, Yeong-Kyeun (Department of Materials Science and Engineering, Andong National University) , Oh, Kyung-Sik (Department of Materials Science and Engineering, Andong National University) , Lee, Hyuk-Jae (Department of Materials Science and Engineering, Andong National University)
To fabricate a thick, porous yttria-stabilized zirconia without cracking and warping, a method for the simultaneous control of the porosity and shrinkage was designed. As a pore former, a potato starch was used. For the control of shrinkage the oxidation of Al metal particles was used. For the sinte...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
A. R. Studart, U. T. Gonzenbach, E. Tervoort, and L. J. Gauckler, 'Processing Routes to Macroporous Ceramics: A Review,' J. Am. Ceram. Soc., 89 [6] 1771-89 (2006)
L. Liu, X. Tan, and S. Liu, 'Yttria Stabilized Zirconia Hollow Fiber Membranes,' J. Am. Ceram. Soc., 89 [3] 1156-59 (2006)
H. Kim, C. Rosa, M. Boaro, J. M. Vohs, and R. J. Gorte, 'Fabrication of Highly Porous Yttria-Stabilized Zirconia by Acid Leaching Nickel from a Nickel-Yttria-Stabilized Zirconia Cermet,' J. Am. Ceram. Soc., 85 [6] 1473-1476 (2002)
Y. Gu, X. Liu, G. Meng, and D. Peng, 'Porous YSZ Ceramics by Water-Based Gelcasting,' Ceram. Int., 25 705-709 (1999)
J. J. Haslam, A. Pham, B. W. Chung, J. F. DiCarlo, and R. S. Glass, 'Effects of the Use of Pore Formers on Performance of an Anode Supported Solid Oxide Fuel Cell,' J. Am. Ceram. Soc., 88 [3] 513-518 (2005)
R. Barea, M. I. Osendi, P. Miranzo, and J. M. F. Ferreira, 'Fabrication of Highly Porous Mullite Materials,' J. Am. Ceram. Soc., 88 [3] 777-79 (2005)
S. F. Corbin and P. S. Apte, 'Engineered Porosity via Tape Casting, Lamination and the Percolation of Pyrolyzable Particulates,' J. Am. Ceram. Soc., 82 [7] 1693-1701 (1999)
O. Lyckfeldt and J. M. F. Ferreira, 'Processing of Porous Ceramics by Starch Consolidation,' J. Eur. Ceram. Soc., 18 131-140 (1998)
M. Kato and Y. Goto, 'Conventional and Microwave- Induced Sintering Mechanisms for Reaction-Bonded Aluminum with Zirconium Oxide Additions,' J. Am. Ceram. Soc., 83 [1] 65-9 (2000)
P. M. Sheedy, H. S. Caram, H. M. Chan, and M. P. Harmer, 'Processing and Properties of $ZrO_2$ -Containing Reaction- Bonded Aluminum Oxide with High Initial Aluminum Contents,' J. Am. Ceram. Soc., 88 [8] 2040-45 (2005)
K. Ishizaki, S. Komarneni, and M. Nanko, 'Porous Materials Process Technology and Applications,' Kluwer Academic Publishers, 1998
Y. S. Han, J. B. Li, and Y. J. Chen, 'Fabrication of Bimodal Porous Alumina Ceramics,' Mater. Res. Bull., 38 373-79 (2003)
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.