$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

셀프 센싱을 이용한 피에조 잉크젯의 파형 설계
Waveform Design for Piezo Inkjet via Self- sensing Measurement 원문보기

한국소음진동공학회논문집 = Transactions of the Korean society for noise and vibration engineering, v.17 no.4 = no.121, 2007년, pp.333 - 341  

김우식 (삼성종합기술원) ,  권계시 (순천향대학교 기계공학과)

Abstract AI-Helper 아이콘AI-Helper

Waveform design method for inkjet printing has been proposed tv pressure wave measurement. The pressure wane inside the inkjet dispenser can be effectively measured by current measurement due to self-sensing capability of PZT. The pressure wave measured from current was verified by commercially avai...

주제어

참고문헌 (18)

  1. Kwon, K. S., Shin, S. J. and Kim, S. J., 2005, 'The Opportunity of Printing Technology for Display Manufacturing Process', Proceedings of Colloquium on Micro/Nano Thermal Engineering, Seoul National University 

  2. Bale, M., et al, 2006, 'Ink Jet Printing: The Route to Production of Full Color P-OLED Displays', Research Paper, Website: http://www.cdtltd.co.uk 

  3. Rhee, J., et al, 2006, 'A 14.1-in Full-color Polymer-LED Display with a-Si TFT Backplane by Ink-jet Printing', SID (society for information display) 

  4. Gohda, T., et al., 2006, 'A 3.6-in 202-ppi Full-color AMPLED Display Fabricated by Ink-jet Method', SID 

  5. Koo, H. S. et al, 2006, 'Fabrication and Chromatic Characteristics of the Greenish LCD Colour-filter Layer with Nano-particle Ink Using Inkjet Printing Technique', Displays, Vol. 27, pp. 124-129 

  6. Creagh, L. T. et al., 2004, 'FPD Manufacturing Conference, Ink Jet Printhead as a precision deposition tool in manufacturing FPDs', SEMICON China 

  7. Albertalli, D., 2005, 'Gen 7 FPD Inkjet Equipment Development status', SID 

  8. Bogy, D. B. and Talke, F. E., 1984, 'Experimental and Theoretical Study of Wave Propagation Phenomena in Drop-on-demand Ink Jet Devices', IBM Journal of Research and Development, Vol. 28, No. 3, pp. 314-321 

  9. Microfab technote, 1999, 'Drive Waveform Effects on Ink-jet Device Performance', 99-03 

  10. Molesa, S. E., 2006, 'Ultra-low-cost Printed Electronics', Ph.D. Dissertation, University of California, Berkeley 

  11. Dong, H. and Morris, J. F., 2006, 'An Experimental Study of Drop-on-demand Drop Formation', AIP, Physics of fluids, Vo. 18, 072102 

  12. Szczech, J. B., Gamota, D. R., Zhang, J., 2002, 'Fine-line Conductor Manufacturing Using Drop-on-demand PZT Printing Technology', IEEE Transactions on Electronics Packaging Manufacturing, Vol. 25, No. 1, pp.26-33 

  13. Lee, C., Toshihiro, I. and Suga, T., 1999, 'Self-excited Piezoelectric PZT Microcantilevers for Dynamic SFM with Inherent Sensing and Actuating Capabilities', Sensor and Actuators A, Vol. 72, pp. 179-188 

  14. Giurgiutiu, V. and Zagrai A. N., 2002, 'Embedded Self-sensing Piezoelectric Active Sensors for On-line Structural Identification', Journal of Vibration and Acoustics, ASME, Vol. 124, pp. 116-125 

  15. Wassink, M. B. G., Bosch, M. J. M., Bosgra, O. H. and Koekebakker, S., 2005, 'Enabling Higher Jet Frequencies for an Inkjet Printhead Using Iterative Learning Control', Proceedings of the 2005 IEEE Conference on Control Applications, Toronto, Canada, Aug. 28-31 

  16. Groninger, M. A., Kruiit, P. G. M., Reinten, H., Schippers, R. H. and Simons, H. M. M., 2003, 'A Method of Controlling an Inkjet Printhead, an Inkjet Printhead Suitable for Use of Said Method, and an Inkjet Printer Comprising Said Printhead', European patent, EP 1 378 360 A1 

  17. Horowitz, P. and Hill Windfield, 1989, 'The Art of Electronics', Cambridge University Press 

  18. Website: http://www.dimatix.com 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

FREE

Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로