최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.31 no.5 = no.260, 2007년, pp.594 - 600
정희택 (한국생산기술연구원 열유체시스템팀) , 윤재호 (한국생산기술연구원 열유체시스템팀) , 박근 (서울산업대학교 기계설계.자동화공학부) , 권오경 (한국생산기술연구원 열유체시스템팀)
Rapid mold heating has been recent issue to enable the injection molding of thin-walled parts or micro/nano structures. Induction heating is an efficient way to heat a conductive workpiece by means of high-frequency electric current caused by electromagnetic induction. Because the induction heating ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Selden, R., 2000, 'Thin Wall Molding of Engineering Plastics a Literature Survey,' J. Injection Molding Tech., Vol. 4, pp. 159-166
Jim, F., 1995, 'Thin Wall Molding Differences in Processing over Standard Injection Molding,' Proceedings of the SPE Annual Technology Conference, Vol. 41, pp. 430-433
Kim, B. H., Suh, N. P., 1986, 'Low Thermal Inertia Molding,' Polym. Plast. Technol. Eng., Vol. 25, pp. 73-93
Jansen, K. M. B., Flaman, A. A. M., 1994, 'Construction of Fast-Response Heating Elements for Injection Molding Applications,' Polym. Eng. Sci., Vol 34, pp. 894-897
Yao, D., Kim, B., 2002, 'Development of Rapid Heating and Cooling Systems for Injection Molding Applications,' Polym. Eng. Sci., Vol. 42, pp. 2471-2481
Yao, D. Kim, B., 2002, 'Increasing Flow Length in Thin Wall Injection Molding Using a Rapidly Heated Mold,' Polym. Plast. Technol. Eng., Vol. 415, pp. 819-832
Park, K., 2004, 'A Study on Flow Simulation and Deformation Analysis for Injection-Molded Plastic Parts Using Three-Dimensional Solid Elements,' Polym Plast. Technol. Eng., Vol. 43, pp. 1569-1585
Chen, S. C., Peng, H. S., Chang, W. R. and Jong, W. R., 2004, 'Simulations and Verifications of Induction Heating on a Mold Plate,' Int. Comm. Heat Mass Transfer, Vol. 31, pp. 971-980
Chang, J. A. Chen, S. C. and Cin, J. C., 2006, 'Rapid Mold Temperature Control on Micro-Injection Molded Parts with High Aspect Ratio Micro-Features,' Proceedings of the SPE Annual Technology Conference, Vol. 52, pp. 1275-1279
Kwon, O. K., Yun, J. H., Cha, D. A., Jung, S. Y. and Park, K., 2006, 'Development of Rapid Mold Heating System Using Induction Heating(2),' Proceedings of the KSME 2006 Fall Annual Meeting, pp. 1296-1301
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.