최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회논문집 = Transactions of the Korean society of machine tool engineers, v.16 no.5, 2007년, pp.77 - 83
이종환 (부산대학교 대학원 기계공학부) , 권동희 (부산대학교 대학원 기계공학부) , 박진효 (부산대학교 대학원 기계공학부) , 김병민 (부산대학교 대학원 기계공학부) , 정융호 (부산대학교 대학원 기계공학부) , 강명창 (부산대학교 하이브리드소재 솔루션 국가핵심연구센터(NCRC)) , 이성용 (한국폴리텍VII 부산대학 컴퓨터응용기계과) , 김정석 (부산대학교 기계공학부)
The study on damaged layer is necessary for machinability improvement in micro machining. The damaged layer in metal cutting is derived from plastic deformation and transformation of metal structure. The damaged layer affects micro mold life and micro machine parts. In this study, the damaged layer ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kwon, D. H., Lee, J. H., Hwang, I. O., Kang, M. C. and Kim, J. S., 2006, 'A Study on the Microscopic Precision of Machined Surface according to Variation of Machining Environments in High Speed Endmilling,' Transactions of the Korean Society of Machine Tool Engineers, Vol. 15, No. 6, pp. 50-57
Sokovic, M. and Mijanovic, K., 2001, 'Ecological Aspects of the Cutting Fluids and its Influence on Quantifiable Parameters of the Cutting Processes,' Journal of Materials Processing Technology, Vol. 109, pp. 181-189
Matsumoto, Y. and Barash, M. M., 1984, 'Residual Stress in the Machined Surface of Hardened SteelHigh Speed Machining,' Presented at the Winter Annual Meeting of the ASME, pp. 193-204
Zhang, Q. H., Zhang, J. H., Jia, Z. X. and Sun, J. L., 1999, 'Material Removal Rate Analysis in the Ultrasonic Machining of Engineering Ceramics,' Journal of Materials Processing Technology, Vol. 88, pp. 180-184
Chu, T. H. and Wallbank, J., 1998, 'Determination of the Temperature of a Machined Surface,' Journal of Manufacturing Science and Engineering ASME, Vol. 120, pp. 259-263
Kang, J. H., 2000, 'Environmentally Conscious Machining Technology and Machine Tool,' Journal of the Korean Society of Machine Tool Engineers, Vol. 9, No. 1, pp. 9-19
Chou, Y. K. and Evans, C. J., 1999, 'White Layers and Thermal Modeling of Hard Turned Surfaces,' International Journal of Machine Tools & Manufacture, Vol. 39, pp. 1863-1881
Mohri, N., Saito, N. and Tsunekawa, Y., 1993, 'Metal Surface Modification by Electrical Discharge Machining with Composite Electrode,' Annals of the CIRP, Vol. 42, pp. 219-222
Park, J. and Jeong, H., 2005, 'A Study on the Fabrication of Micro Groove on Si Wafer Using Chemical Mechanical Machining,' Journal of Mechanical Science and Technology, Vol. 19, No. 11, pp. 2096-2104
Rahman, M. and Kumar, A. S., 2001, 'Experimental Evaluation on the Effect of Minimal Quantities of Lubricant in Milling,' J. of MTM, Vol. 42, pp. 539-547
Song, C. S. and Kim, J. H., 2005, 'Cutting Characteristics of Dry Turning Using Compressed Air,' Transactions of the Korean Society of Machine Tool Engineers, Vol. 14, No. 1, pp. 8-14
Kwon, D. H., Hwang, I. O., Kang, M. C., Kim, J. H., Kim, J. S. and Ahn, J. H., 2006, 'Development of the Micro Tool Dynamometer for Micro Machining,' KSPE Spring Annual Meeting, pp. 217-218
※ AI-Helper는 부적절한 답변을 할 수 있습니다.