최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓造船學會 論文集 = Journal of the society of naval architects of korea, v.44 no.5, 2007년, pp.474 - 481
A three-dimensional finite element model has been used to simulate the bead on plate welding of curved steel plates having curvature in the welding direction. By using traditional method such as thermal-elastic-plastic(TEP) finite element analysis. the weld-induced deformation can be accurately pred...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Jane, C.D. and Lee, C.H., 2000, 'A Study on the Prediction and Control of Welding Deformation of Ship Hull Blocks,' Journal of the Society of Naval Architects of Korea, Vol. 37, No. 2, pp. 127-136
Li, Y., Wang, J., Chen, M. and Shen, X., 2004, 'Finite Element Analysis of Residual Stress in the Welded Zone of High Strength Steel,' Bull. Mater. Sci., Vol. 27, No. 2, pp, 127-132, Indian Academy of Science
Lienhard(IV), J.H. and Lienhard(V), J.H., 2004, A Heat Transfer Textbook, Phlogiston Press, Cambridge, Massachusetts
Mollicone, P., Camilleri, D., Gray, T.G.F. and Comlekci, T., 2006, 'Simple Thermo-Elastic-plastic Models for Welding Distortion Simulation,' Journal of Materials Processing, Vol. 176, Issues 1-3, pp. 77-86
Michaleris, P. and DeBiccari, A., 1997, 'Prediction of Welding Distortion,' Welding Journal, Vol. 76, No. 4, pp. 172s-180s
Takeda, Y., 2002, 'Prediction of Butt Welding Deformation of Curved Shell Plates by Inherent Strain Method,' Journal of Ship Production, Vol. 18, No. 2, pp. 99-104
Luo, Y., lshayama, M. and Murakawa, H., 1999, 'Welding of Plates with Longitudinal Curvature,' Trans. JWRI, Vol. 28, No. 2
Wu, A., Syngellakis, S. and Mellor, B.G., 2000, 'Finite Element Analysis of Residual Stresses in a Butt Weld,' University of Southampton, UK
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.