최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓造船學會 論文集 = Journal of the society of naval architects of korea, v.45 no.6, 2008년, pp.703 - 709
장창두 (서울대학교 조선해양공학과) , 고대은 (동의대학교 조선해양공학과) , 하윤석 (삼성중공업(주) 산업기술연구소 용접연구파트)
In the shipyard, line heating and triangle heating are two major processes for forming curved plates in various shapes. While there have been many studies on line heating, triangle heating has been rarely studied due to its complicated heating process with irregular multi-heating paths and highly co...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Jang, C.D., Ko, D.E., Kim, B.I. and Park, J.U., 2001a, " An Experimental Study of Charactecistics of Plate Deformation by Heating Process," Journal of the Society of Naval Architects of Korea, Vol. 38, No. 2, pp. 62-70
Jang, C.D., Ko, D.E., Moon, S.C. and Seo, Y.R., 2001b, " Simulation of Plate Deformation by Triangle Heating Process," Journal of the Society of Naval Architects of Korea, Vol. 38, No. 4, pp. 66-74
Ko, D.E., 1998, A Study on the Prediction of Deformations of Plates due to Line Heating using a Thermal Elasto-Plastic Analysis Model, Ph.D. Dissertation, Seoul National University, Korea
Ko, D.E., Jang, C.D., Seo, S.I. and Lee, H.W., 1999, " Realtime Simulation of Deformation due to Line Heating for Automatic Hull Forming System," Journal of the Society of Naval Architects of Korea, Vol. 36, No. 4, pp. 116-127
Nomoto, T., Takechi, S., Shouki, K., Aoyama, K., Enosawa, M. and Saitoh, M., 1991, " Development of Simulator for Plate by Line Heating Considering In-Plane Shrinkage," Journal of the Society of Naval Architects of Japan, Vol. 170
Ueda, Y., Murakawa, H., Mohamaed, R. A., Neki, I., Kamachika, R., Ishiyama, M. and Ogawa, J., 1991, " Development of Computer Aided Process Planning System for Plane Bending by Line Heating( $1^{st}$ Report), Relation Between Final Form of the Plate and Inherent Strain," Journal of the Society of Naval Architects of Japan, Vol. 170
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.