최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회논문집 = Transactions of the Korean society of machine tool engineers, v.17 no.6, 2008년, pp.1 - 7
김성민 (특허청 제어기계심사팀) , 고준빈 (한밭대학교 기계설계공학과) , 박희상 (충남대학교 대학원 BK21 메카트로닉스 사업단)
This paper research the trend of technology of the high efficient and reliability machining center and high flexibility parallel manipulator machining center including linear motor machining center, submicron machining center and direct drive 5 axis machining center using patent information of Korea...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Yotaro, H., and Takaaki, N., 1995, "Actual Conceptual Design Process for an Intelligent Machining Center," Annals of the CIRP, Vol. 44, No. 1, pp. 123-128
Lee, S. M., Choi, H., Lee, J. C., and Cheong, S. H., 2000, "A Study on the Surface Grinding using the Machining Center (II)," Proceeding of the Korean Society of Precision Engineering Autumn Conference, pp. 880-883
Park, D. G. and Im, D. S., 2005, "on the Characteristics in Surface Cutting for Face Cutter of Machining Center," Transactions of the Korea Society of Machine Tool Engineers, Vol. 14, No. 2, pp. 21-26
Kim, S. I. and Cho, J. W., 2004, "Thermal Characteristic Analysis of a High-Speed Horizontal Machining Center with Built-in Motor and Linear Motors," Transactions of the Korea Society of Machine Tool Engineers, Vol. 13, No. 5, pp. 30-37
Choi, D. B., Kim, S. I., and Song, J. B., 1994, "Air Cooling Characteristics of a High-Speed Spindle System for Machine Tools," Transactions of the Korean Society of Precision Engineering, Vol. 11, No. 1, pp. 123-128
Kim, S. H., Yoon, K. S., and Lee, M. H., 2003, "Contour Error Analysis and Feed Controller Optimization for Machining Center," Transactions of the Korea Society of Machine Tool Engineers, Vol. 12, No. 3, pp. 17-24
Cho, B. H. and Seong, H. Y., 1999, "A Study on the Design Optimization of Thickness of Machining center Bed under Dynamic Loading by using Genetic Algorithm," Transactions of the Korea Society of Machine Tool Engineers, Vol. 8, No. 1, pp. 67-73
Yoon, J. H., Lee, J. W., Jung, K. Y., and Jung, M. S., 1998, "Cutting Condition for Improving Cutting Efficiency and Accuracy by Ball End mill on a Machining Center," Transactions of the Korea Society of Machine Tool Engineers, Vol. 7, No. 3, pp. 99-103
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.