최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.7 no.4, 2008년, pp.17 - 23
박준홍 (동아대학교 신소형재RIC) , 전언찬 (동아대학교 기계공학과) , 김태호 (동아대학교 기계공학과) , 문순균 (KM마이크론)
Development of die technology for holder and barrel dies is necessary according to minimization of lens assembly, image sensor, and connectors. In these cases, there are two technical problems arising from die design. One is determination of knock-out pin location in die set. Minimization of lens as...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.