최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.17 no.1 = no.99, 2008년, pp.13 - 18
윤승채 (충남대학교 대학원 나노소재공학과) , 복천희 (충남대학교 대학원 나노소재공학과) , 곽은정 (충남대학교 대학원 나노소재공학과) , 정영기 (한국 생산기술연구원) , 김택수 (한국 생산기술연구원) , 김형섭 (충남대학교 대학원 나노소재공학과)
Mg and Mg alloys are promising materials for light weight high strength applications. In this paper, grain refinement of pure Mg using severe plastic deformation was tried to enhance the mechanical properties of the hard-to-deform metallic material. The microstructure and the mechanical properties o...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
S. Y. Chang, S. W. Lee, K.M. Kang, S. Kamado, Y. Kojima, 2004, Improvement of mechanical characteristic in severe plastic deformed Mg alloys, Mater. Trans., Vol. 45, pp. 488-492
M. Mabuchi, H. Iwahashi, K. Yanase, K. Higashi, 1997, Low temperature superplasticity in an AZ91 magnesium alloy processed by ECAE, Scripta Mater., Vol. 36, pp. 681-686
A. Yamashita, Z. Horita, T. G. Langdon, 2001, Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation, Mater. Sci. Eng. A, Vol. 300, pp. 142-147
S. R. Agnew, J. A. Horton, T. M. Lillo, D. W. Brown, 2004, Enhanced ductility in strongly textured Mg produced by equal channel angular processing, Scripta Mater., Vol. 50, pp. 377-381
D. W. Brown, S. R. Agnew, M. A. M. Bourke, T. M. Holden, S. C. Vogel, C. N. Tome, 2005, Internal strain and texture evolution during deformation twinning in magnesium, Mater. Sci. Eng. A, Vol. 399, pp. 1-12
S. R. Agnew, P. Mehrotra, T. M. Lillo, G. M. Stoica, P. K. Liaw, 2005, Texture evolution of five wrought magnesium alloys during route a equal channel angular extrusion: Experiment and simulation, Acta Mater., Vol. 53, pp. 3135-3146
S. Ohsaki, S. Kato, N. Tsuji, T. Ohkubo, K. Hono, 2007, Bulk mechanical alloying of Cu-Ag and Cu/Zr two-phase microstructures by accumulative roll-bonding process, Acta Mater., Vol. 55, pp. 2885-2895
H. S. Kim, M. H. Seo, S. I. Hong, 2000, On the die corner gap formation in equal channel angular pressing, Mater. Sci. Eng. A, Vol. 291, pp. 86-90
R. Z. Valiev, R. K. Islamgaliev, I. V. Alexandrov, 2000, Bulk nanostructured materials from severe plastic deformation, Prog. Mater. Sci., Vol. 45, pp. 103-189
D. H. Shin, J. J. Park, S. Y. Chang, Y. K. Lee, K. T. Park, 2002, Ultrafine grained low carbon steels fabricated by equal channel angular pressing: microstructures and tensile properties, ISIC Int. Vol. 42, pp. 1490-1496
Y. C. Chen, Y. Y. Huang, C. P. Chang, P. W. Kao, 2003, The effect of extrusion temperature on the development of deformation microstructures in 5052 aluminium alloy processed by equal channel angular extrusion, Acta Mater., Vol. 51, pp. 2005-2015
V. M. Segal, 1995, Materials processing by simple shear, Mater. Sci. Eng. A, Vol. 197, pp. 157-164
Y. Iwahashi, J. Wang, Z. Horita M. Nemoto, T. G. Langdon, 1996, Principle of equal-channel angular pressing for the processing of ultra-fine grained materials, Scripta Mater., Vol. 35, pp. 143-146
Jager, P. Lukac, V. Gartnerova, J. Bohlen, K. U. Kainer, 2004, Tensile properties of hot rolled AZ31 Mg alloy sheets at elevated temperatures J. Alloys Compounds, Vol. 378, pp. 184-187
M. Chandrasekaran, Y. M. S. John, 2004, Effect of materials and temperature on the forward extrusion of magnesium alloys, Mater. Sci. Eng. A, Vol. 381, pp. 308-319
H. Liu, Y. Chen, Y. Tang, S. Wei, G. Niu, 2007,Tensile and indentation creep behavior of Mg-5% Sn and Mg-5% Sn-2% Di alloys, Mater. Sci. Eng. A, Vol. 464, pp. 124-128
Y. Wang, M. Chen, F. Zhou, E. Ma, 2003, High tensile ductility in a nanostructured metal, Nature, Vol. 419, pp. 912-915
J. Koike, 2003, New deformation mechanism in fine grain Mg alloys, Mater. Sci. Forum, Vol. 419- 422, pp. 189-194
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.