최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국소음진동공학회논문집 = Transactions of the Korean society for noise and vibration engineering, v.18 no.4 = no.133, 2008년, pp.432 - 438
윤보영 (인하대학교 대학원 기계공학과) , 구오흥 (인하대학교 대학원 기계공학과) , 손정우 (인하대학교 대학원 기계공학과) , 최승복 (인하대학교 기계공학부)
This paper presents a new jetting dispenser driven by a piezoelectric actuator at high operating frequency to provide very small dispensing dot size of adhesive in modern semiconductor packaging processes. After describing the mechanism and operational principle of the dispenser, a mathematical mode...
Dixon, D., Kazalski, J., Murch, F. and Marongelli, S., 1997, 'Practical Issues Concerning Dispensing Pump Technologies', Circuits Assembly, pp. 36-40
Ness, C. Q. and Lewis, A. R., 1998, 'Adhesives/epoxies & Dispensing', Surface Mount Technology(SMT), pp. 114-122
Wedekin, S., 2001, 'Micro Dispensing Comes of Age', Surface Mount Technology(SMT), pp. 62-71
Chen, X. B. and Kai, J., 2004, 'Modeling of Positive-displacement Fluid Dispensing Processes', IEEE Transaction on Electronics Packaging Manufacturing, Vol. 27, No. 3, pp. 157-163
Adamson. S. J., 2004, 'Jetting of Underfill and Encapsulants for High-speed Dispensing in Tight Spaces', APEX IPC Printed Circuits Expo Anaheim, CA
Choi, M. K., Yun, B. Y., Nguyen, Q. H., Choi, S. B. and Hong, S. M., 2007, 'Performance Evaluation of a New Type of Jetting Dispenser Using Piezoelectric Actuator', Proceedings of the SPIE's 14th Annual Symposium on Smart Structures and Materials, SPIE Vol. 6525, pp. 652522-1- 652522-9
Nasser, K. M., 2000, 'Development and Analysis of the Lumped Parameter Model of a PiezoHydraulic Actuator', Master's Thesis, Virginia Polytechnic Institute and State University
White, F. M., 2003, Fluid Mechanics, McGraw-Hill
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.