최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.33 no.1 = no.280, 2009년, pp.17 - 27
안대환 (포항공과대학교 기계공학과) , 김동식 (포항공과대학교 기계공학과)
Water jet impingement cooling is used to remove heat from high-temperature surfaces such as hot steel plates in the steel manufacturing process (thermo-mechanical cooling process; TMCP). In those processes, uniform cooling is the most critical factor to ensure high strength steel and good quality. I...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
충돌제트의 장점은? | 충돌제트는 냉각수의 상변화에 의한 잠열과 유동의 효과로 우수한 냉각능력을 가지고 있어서 여러 산업에서 응용되어 왔다. 특히 철강산업에서, 우수한 기계적인 강도를 얻기 위해 압연 후 고온의 강판을 급속냉각을 하게 되는데, 냉각 성능이 뛰어난 충돌제트를 주로 사용하고 있다. | |
충돌제트에 의한 냉각 시 발생할 수 있는 문제점은? | 충돌제트는 고온의 판 위를 흐르며 다양한 비등영역을 거치므로 해석하기 힘든 열전달현상이 나타나게 된다. 충돌제트에 의한 냉각시에 공간적인 불균일 냉각이 평탄도 불량을 야기하여 심각한 문제가 되고 있다. 이러한 현상을 해결하기 위한 기초데이터로서 Fig. | |
평면충돌제트에 의한 고온 판의 냉각에서 나타나는 열전달계수의 공간분포와 시간에 따른 변화를 분석한 결과는? | 본 연구에서는 평면충돌제트에 의한 고온 판의 냉각에서 나타나는 열전달계수의 공간분포와 시간에 따른 변화를 분석하였다. 여기에서 열전달계수는 판의 표면온도와 비등영역 및 유동에 의해서 영향을 받게 된다. 유량을 달리하는 냉각 실험으로부터 유량이 열전달계수의 폭방향 및 시간에 따른 분포에 미치는 영향을 알 수 있었다. 유량이 적을 때는 판 윗면의 열전달계수가 대체적으로 균일하지만 유량이 증가하면서 판의 가장자리 방향으로 증가하는 분포를 가진다. 고유량에서 냉각이 진행됨에 따라서 열전달계수의 가장자리 증가현상은 후반기에 주로 나타남을 알 수 있었다. 또한, 유량이 증가하면서 옆면의 열전달계수도 증가하는 것을 알 수 있었다. 고유량에서 옆면의 열전달계수가 윗면의 상응하는 수준으로 증가하고, 이에 대한 고려가 중요함을 알 수 있었다. 표면온도와 열유속의 관계의 유량에 따른 변화 및 비등영역의 변화가 판의 위치에 따라서 달라지는 것을 알 수 있었다. 또한 동일한 Red 이라도 판위의 분사 방향을 달리 하면 표면유동 및 옆면의 냉각효과로 인해 중심부의 열전달 특성이 크게 변화함을 알 수 있었다. |
Choi, K. J. and Yao, S. C., 1987, “Mechanisms of Film Boiling Heat Transfer of Normally Impacting Spray”, Int. J. Heat Mass Transfer, Vol. 30, No. 2, pp. 311-318
Ohkubo, H. and Nishio, S., 1990, “Study on Accurate Prediction of Heat Transfer Characteristics of Mist Cooling(Effects of Surface Wettability)”, JSME Int. Journal Series II, Vol. 33, No. 2, pp. 326-332
Buckingham, F. P. and Haji-Sheikh, A., 1995, “Cooling of High-Temperature Cylindrical Surfaces Using a Water-Air Spray”, Trans. of the ASME, Vol. 117, pp. 1018-1027
Lee, P. J., Choi, H. W. and Lee, S. H., 2000, “The Effect of Ambient Air Condition on a Hot Steel Plate Cooled by Impinging Water Jet”, Trans. of the KSME (B), Vol. 24, No. 1, pp. 29-38
Vader, D. T., Incropera, F. P. and Viskanta, R., 1991, “A Method for Measuring Steady Local Heat Transfer to an Impinging Liquid Jet”, Experimental Thermal and Fluid Science, Vol. 4, pp. 1-11
Zumbrunnen, D. A., Incropera, F. P. and Viskanta, R., 1990, “Method and Apparatus for Measuring Heat Transfer Distributions on Moving and Stationary Plates Cooled by a Planar Liquid Jet”, Experimental Thermal and Fluid Science, Vol. 3, pp. 202-213
Xu, F. and Gadala, M. S., 2006, “Heat Transfer Behavior in the Impingement Zone Under Circular Water Jet”, Int. J. Heat and Mass Transfer, Vol. 49, pp. 3785-3799
Baonga, J. B., Louahlia-Gualous, H. and Imbert, M., 2006, “Experimental Study of the Hydrodynamic and Heat Transfer of Free Liquid Jet Impinging a Flat Circular Heated Disk”, Applied Thermal Engineering, Vol. 26, pp. 1125-1138
Alifanov, O. M., 1994, “Inverse Heat Transfer Problems”, Springer-Verlag, Berlin
Beck, J. V., Blackwell, B. and Clair, C. R. ST. JR., 1985, “Inverse Heat Conduction Ill-Posed Problems”, A Wiley-Interscience Publication, New York
Colaco, M. J. and Orlande, H. R. B., 1999, “Comparison of Different Versions of the Conjugate Gradient Method of Function Estimation”, Numerical Heat Transfer(Part A), Vol. 36, pp. 229-249
Kim, W. S., Ozisik, M. N. and Choi, E. R., 1999, “Alternate Application of Regular and Modified Conjugated Gradient Method”, Hybrid Methods in Engineering, Vol. 1, No. 3, pp. 217-234
Kim, S. K. and Lee, W. I., 2004, “Implementation of Inverse Method for Estimating Undetermined Boundary in a Two-Dimensional Slab Based on Temperature Measurement”, Numerical Heat Transfer(Part A), Vol. 46, pp. 515-523
Wang, T. Y. and Chen, C. C. P., 2003, “Thermal-ADI; A Linear-Time Chip-Level Dynamic Thermal-Simulation Algorithm Based on Alternating-Direction-Implicit(ADI) Method”, IEEE Trans. VLSI Systems, Vol. 11, No. 4, pp. 691-700
Al-Ahamdi, H. M., Yao, S. C. and Kasperski, K., 2002, “Experimental Study on the Spray Cooling of High Temperature Metal Using Full Cone Industrial Sprays”, 2002 Steelmaking Conference Proceedings, pp. 365-374
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.