최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.26 no.2 = no.215, 2009년, pp.26 - 34
이지형 (영남대학교 대학원 기계공학과) , 고태조 (영남대학교 기계공학부) , 백대균 (영남대학교 기계공학부)
This paper is related to MQL (Minimum Quantity Lubrication) milling process, which is one of the environmentally friendly cuttings. The objective is to compare MQL milling process with conventional cutting fluid systems. To this end, machinability of MQL milling process was investigated, followed by...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kang, J. H., Lee, C. H., Song, J. Y. and Lee, J. K., "Environmentally conscious machining technology considered economic view," Proc. of KSPE Fall Conference, pp. 972-975, 2000
Born, M. and Wolf, E., "Principles of Optics 7th Edition," Cambridge University Press, pp. 517-521, 1990
NIOSH, 'Criteria for a recommended standard occupational exposure to metalworking fluids,' US. Dep. of Health and Human Services, CDC. NIOSH Publication, 1998
Cselle, T., 'New direction in drilling,' Manufacturing Engineering, Vol. 115, No. 2, pp. 70-90, 1995
Chang, Y. S., Kim, Y. S., 'Optimization of milling process considering the environmental impact of cutting fluids,' J. of the KSPE, Vol. 15, No. 12, pp. 14-20, 1998
Dhar, N. R., Ahmed, M. T. and Islam, S., "An experimental investigation on effect of minimum quantity lubrication in machining AISI 1040 steel," International Journal of Machine Tools & Manufacture, Vol. 47, No. 5, pp. 748-753, 2007
Bruni, C., Forcellese, A., Gabrielli, F. and Simoncini, M., 'Effect of the lubrication-cooling technique, insert technology and machine bed material on theworkpart surface finish and tool wear in finish turning of AISI 420B,' International Journal of Machine Tools & Manufacture, Vol. 46, No. 12-13, pp. 1547-1554, 2006
Changwon University Machine Tool Research Center "Development of Cutting Technology Using Minimum Quantity Lubrication," pp. 62-70, 2005
Chang, Y. S. and Kim, S. T., "Evaluation of the economics of high speed machining considering environmental effects," Clean Technology, Vol. 12,No. 3, pp. 182-189, 2006
Chang, Y. S. and Kim, Y. S, "Optimization of milling process considering the environmental impact of cutting fluids," J. of the KSPE, Vol. 15, No. 12, pp. 14-20, 1998
※ AI-Helper는 부적절한 답변을 할 수 있습니다.