산 매질 조건에서 다양한 할로겐산화물을 이용하여 황 원소를 포함한 유기물(thiourea, methionine)과 무기물(sulfate, thiophosphate)의 산화에 관한 연구를 수행하였다. 산화반응의 최적조건은 3 M 질산용액 매질에서 bromate (${BrO_3}^-$)를 산화제로 사용했을 때 얻어졌다. 유기 황 화합물인 thiourea에서는 100%의 산화 수율을 확인하였으며, methionine을 사용한 결과는 87%이었다. 또한 무기 황 화합물인 thiophosphate와 sulfate의 산화는 각각 80%와 100%의 산화 수율을 얻었으며, 5%의 상대표준표차(RSD)가 있음을 확인하였다. Thiourea의 산화는 1.6배의 bromate가 필요하였으며, methionine과 thiophosphate의 경우에는 20배 이상이 필요함을 관찰하였다. 황산염 이온은 황산 바륨($BaSO_4$)으로 침전을 확보하였으며, 이때 얻어진 방사성 황산 바륨($Ba^{35}SO_4$)은 기체비례계수기(gasproportional counter, GPC)을 이용하여 정량적으로 측정하였다. $^{35}S$ 계측을 위한 소광보정곡선은 무게 차이를 이용하여 작성되었다.
산 매질 조건에서 다양한 할로겐산화물을 이용하여 황 원소를 포함한 유기물(thiourea, methionine)과 무기물(sulfate, thiophosphate)의 산화에 관한 연구를 수행하였다. 산화반응의 최적조건은 3 M 질산용액 매질에서 bromate (${BrO_3}^-$)를 산화제로 사용했을 때 얻어졌다. 유기 황 화합물인 thiourea에서는 100%의 산화 수율을 확인하였으며, methionine을 사용한 결과는 87%이었다. 또한 무기 황 화합물인 thiophosphate와 sulfate의 산화는 각각 80%와 100%의 산화 수율을 얻었으며, 5%의 상대표준표차(RSD)가 있음을 확인하였다. Thiourea의 산화는 1.6배의 bromate가 필요하였으며, methionine과 thiophosphate의 경우에는 20배 이상이 필요함을 관찰하였다. 황산염 이온은 황산 바륨($BaSO_4$)으로 침전을 확보하였으며, 이때 얻어진 방사성 황산 바륨($Ba^{35}SO_4$)은 기체비례계수기(gas proportional counter, GPC)을 이용하여 정량적으로 측정하였다. $^{35}S$ 계측을 위한 소광보정곡선은 무게 차이를 이용하여 작성되었다.
The oxidation studies of a sulfur to a sulfate ion by various oxyhalide oxidants in organic (thiourea, methionine) and inorganic (sulfate, thiophosphate) compounds were carried out in an acidic solution. The optimized result of the oxidation reaction was obtained when a bromate compound (${BrO_...
The oxidation studies of a sulfur to a sulfate ion by various oxyhalide oxidants in organic (thiourea, methionine) and inorganic (sulfate, thiophosphate) compounds were carried out in an acidic solution. The optimized result of the oxidation reaction was obtained when a bromate compound (${BrO_3}^-$) as an oxidant and a 3 M $HNO_3$ solvent were used. The chemical yield for the oxidation of the organic and inorganic sulfur compounds to a sulfate ion was monitored as 80% for thiophosphate, 87% for methionine, and 100% for thiourea and sulfate within 5% RSD. The oxidations of thiourea required at least 1.6 equivalents of the bromate in an acidic solution. In the case of the oxidation of methionine and thiophosphate, the oxidation yields were above 80% if the bromate was used at 20 times higher than that of the substrates. The sulfate ion was quantitatively measured by using a GPC counting of $^{35}S$ followed by precipitates of $BaSO_4$. A quenching correction curve for the $^{35}S$ counting was obtained to use the difference via the precipitate weight result.
The oxidation studies of a sulfur to a sulfate ion by various oxyhalide oxidants in organic (thiourea, methionine) and inorganic (sulfate, thiophosphate) compounds were carried out in an acidic solution. The optimized result of the oxidation reaction was obtained when a bromate compound (${BrO_3}^-$) as an oxidant and a 3 M $HNO_3$ solvent were used. The chemical yield for the oxidation of the organic and inorganic sulfur compounds to a sulfate ion was monitored as 80% for thiophosphate, 87% for methionine, and 100% for thiourea and sulfate within 5% RSD. The oxidations of thiourea required at least 1.6 equivalents of the bromate in an acidic solution. In the case of the oxidation of methionine and thiophosphate, the oxidation yields were above 80% if the bromate was used at 20 times higher than that of the substrates. The sulfate ion was quantitatively measured by using a GPC counting of $^{35}S$ followed by precipitates of $BaSO_4$. A quenching correction curve for the $^{35}S$ counting was obtained to use the difference via the precipitate weight result.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
제안 방법
In this study, inactive sulfur compounds such as thiourea, DL-methionine, and thiophosphate were oxidized to sulfate ions by using oxyhalide as an oxidant for the separation and the analysis of the wastes generated from the institution. And we need to use many quantities (<10 g) of samples and acquire adequate counting efficiency This sulfate ion was quntitatively measured by a gravimetric method?1, 12 On the basis of the oxidation, a labeled sulfur compound such as Na23>SO4 would be appropriate for the examination of a chemical yield.
The recovery test for H23>SO4 was performed by measuring the weight and the counting efficiency of GPC. 0.
이론/모형
The oxidation of the sulfur in thiourea by various oxyhalides oxidants in an acidic solution was observed by using a gravimetric method (Table 1). Chlorate (CIO3-) and perchlorate (C1O)as oxidants oxidized a thiourea to a sulfate ion via no precipitate.
참고문헌 (13)
P. E. Koehler, Phys. Rev. C: Nuclear Physics, 44, 1675 (1991)
※ AI-Helper는 부적절한 답변을 할 수 있습니다.