$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

공간구조물의 탄성 분기좌굴해석을 위한 수치해석 이론 개발
A Development of Analytical Strategies for Elastic Bifurcation Buckling of the Spatial Structures 원문보기

韓國鋼構造學會 論文集 = Journal of Korean Society of Steel Construction, v.21 no.6 = no.103, 2009년, pp.563 - 574  

이경수 (인하대학교 건축학부) ,  한상을 (인하대학교 건축학부)

초록
AI-Helper 아이콘AI-Helper

본 논문은 기하학적 비선형성을 가진 보존적 단일 하중 매개변수의 탄성 상태 공간구조의 탄성 분기 좌굴이론에 관한 수치 해석적 기본 방법 및 경로 추적, pin-pointing, 경로 전환을 기술하고 있다. 비선형 탄성 불안정 상태는 극한점과 분기점으로 분류될 수 있으며, 평형경로상의 평형점의 계산 및 평형경로상의 특이점을 찾기 위한 pin-pointing 반복계산을 수행하는 일반적인 비선형 수치해석법으로 극한점을 계산할 수 있다. 그러나 분기좌굴 해석을 위해서는 좌굴 후 분기경로의 추적을 위한 분기경로 전환 알고리즘이 추가적으로 필요하다. 본문에서는 에너지이론에 기초한 일반 탄성안정이론을 소개하고, 평형경로 추적, 다분기 좌굴점을 찾기 위한 간접법과 다분기의 경로 전환에 관한 이론을 전개한다. 분기좌굴 해석예제로 트러스로 이루어진 스타돔, 핀지지의 평면아치의 분기좌굴 해석을 수행하여 본문에서 제시한 수치해석법의 정확성 및 적용성을 검증한다.

Abstract AI-Helper 아이콘AI-Helper

This paper briefly describes the fundamental strategies--path-tracing, pin-pointing, and path-switching--in the computational elastic bifurcation theory of geometrically non-linear single-load-parameter conservative elastic spatial structures. The stability points in the non-linear elasticity may be...

주제어

참고문헌 (30)

  1. 이경수, 한상을 (2009) 공간프레임의 대변형 해석을 위한 오일러리 안정식화, 대한건축학회 논문집(구조계), 제25권, 제1호, pp.73-80 

  2. 한상을, 윤한흠 (2000) 래티스 돔의 다분기 해석을 위한 알고리즘. 대한건축학회논문집. 제16권, 제9호, pp.3-9 

  3. 한상을, 이경수 (2007) 공간구조의 후좌굴 해석에 관한 연구, 대한건축학회 논문집(구조계), 제23권, 제7호, pp.53-60 

  4. 한상을, 이경수 (2007) 공간구조의 비선형 탄소성 후좌굴 해석에 관한 연구, 대한건축학회 논문집(구조계), 제23권, 제12호, pp.59-68 

  5. 細野秀 (1974) 弧長法たよろ彈性挫屈問題の解析, 博士學位論文, 東京大學 

  6. Choong, K. K., and Hangai, Y. (1993) Review on methods of bilurcation analysis for geometrically nonlinearstructures, ull. Int. Assoc. Shells Spatial Struct.(issue dedicated to SE1KEN-IASS Symposiunl on Nonlinear Analysis and Design for Shell and SpatialStructures), Vol. 34, No. 2, pp.133-149 

  7. Crisfield. M. S. (1981) A fast inremental iterative solutionprocedure that handles 'snap through', Computer &Structures, Vol.13 pp.55-62 

  8. Crisfield, M. A. (1982) An arc-length method includingline searches and accelerations, Int. J. Numer. Meth.Eng. Vol.19, pp.1269-1289 

  9. Crisfield, M. A., and Shi, J. (1990) A review of solutionprocedures and path-following techniques in relationto the non-linear finite element analysis of structures,in Nonlinear computational mechanics: state of theart, edited by Wriggers, P. and Wagner, W. (Eds),Springer-Verlag, Berlin, pp.47-68 

  10. Crisfield, M. A. (1997) Nonliear finite element analysis ofsolids and structures, Vol. 2, Advanced Topics, John Wiley & Sons 

  11. Fujii, F., and Choong, K. K. (1992) Branch-switching inbifurcation of structures., Journal of Engineering Mechanics, ASCE, Vol. 118, pp.1578-1596 

  12. Fujii, F., and Asada, K. (1993) Branch-switching insimple spatial bifurcation models, SEIKEN-1ASS Svmp. on Nonlinear Analysis and Design jbr Shellsand Spatial Structures, Tokyo, pp.515-522 

  13. Fujii, F., and Ramm, E. (1997) Computational bifurcationtheory-path-tracing, pinpointing and path-switching,Engineering Structures, Vol.19, pp.385-392 

  14. Fujii, F., Ikeda, K., Noguchi, H., and Okazawa, S. (2001)Modied stiness iteration to pinpoint multiple bifurcationpoint, Computer Methods in Applied Mechanics andEngineering, Vol. 190, No. 18, 19, pp.2499-2522 

  15. Fujii, F., and Noguchi, H. (2002) Eigenvector-free pinpointingiteration for multiple bifurcation. Fifth World Congresson Computational Mechanics (WCCM V), Vienna 

  16. Fujii, F., and Noguchi, H. (2003) Eigenvector-free indicator, pinpointing and brach-switching for bifurcation, Commun.Numer. Meth. Engng, Vol. 9, pp.445-457 

  17. Hangai, Y., and Kawamata, S. (1973) Aanlysis of geometrically nonlinear and stability problems bystatic perturbation method, Report of The Industrial Science The University of Tokyo, pp.22-5 

  18. Kassimali, A., and Abbasnia, R. (1991) Large deformationanalysis of elastic space frames. ASCE J. Struc.Eng, Vol. 117, No. 7, pp.2067-2087 

  19. Koiter, W. T. (1945) On the stability of elastic equilibrium, Thesis, Polytechnic Institute, Delft H. T., Paris, Amsterdam 

  20. Meek, J. L., and Tan, H. S. (1984) Geometrically NonlinearAnalysis of Space Frames by an Incremental IterativeTechnique. Computer Methods in Applied Mechanicsand Engineering, Vol. 47. pp.261-282 

  21. Meek, J. L., and Loganathan, S. (1989) Large displacementanalysis of space frame structures, Computer Methodsin Applied Mechanics and Engineering, Vol. 72, pp.57-75 

  22. Powell, G. H. (1969) Theory of nonlinear elastic structures, J. Struct. Div. ASCE, 95 ST12, pp.2687-2701 

  23. Ramm, E. (1981) Strategies for tracing the non-linearresponse near limit points, in Nonlinear. finite elementanalysis in structural mechanic, Wunderlich, W. etal. (Eds), Springer-Verlag. Berlin, pp.63-89 

  24. Riks, E. (1979) An incremental approach to the solutionof snapping and buckling problems, Int. J. SolidsStructures, Vol. 15, pp.529-551 

  25. Riks, E. (1984) Some computational aspects of thestability analysis of nonlinear structures, ComputerMethods in Applied Mechanics and Engineering,Vol. 47, pp.219-259 

  26. Sabir, A. B., and Lock, A. C. (1973) Large deflection,geometrically nonlinear finite element analysis ofcircular arches, Int. J. Mech. Sci, Vol. 15, pp. 37-47 

  27. Thompson, J. M. T., and Hunt. G. W. (1973) A generaltheory of elastic stability, John Wiley & Sons, Chichester, UK 

  28. Wagner, W., and Wriggers, P. (1988) A simple method forthe calculation of postcritical branches, EngngComput, Vol. 5, pp.103-109 

  29. Wriggers, P., Wagner, W., and Miehe, C. (1988) A quadraticallyconvergent procedure for the calculation of stabilitypoints in finite element analysis. Computer Methods inApplied Mechanics and Engineering, Vol. 70, pp. 

  30. Wriggers., P., and Simo, J. C.(1990) A general procedurefor the direct computation of turning and bifurcationpoints, Int. J. Numer. Meth. Engng, Vol. 30, pp.155-176 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로