최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기윤활학회지 = Journal of the Korean Society of Tribologists and Lubrication Engineers, v.25 no.6, 2009년, pp.404 - 408
성인하 (한남대학교 기계공학과)
In this paper, the relationship between the material removal rate and the interfacial mechanical properties at particle-surface contact situation, which can be seen in an abrasive machining process using micro/nano-sized particles, was discussed. Friction and stiffnesses were measured experimentally...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Oliver, M. (Ed.), Chemical-Mechanical Planarization of Semiconductor Materials, pp.6-7, Springer-Verlag, Berlin, 2004
Jairath, R., 'Consumables for the Chemical Mechanical Polishing (CMP) of Dielectrics and Conductors,' Mat. Res. Soc. Symp. Proc., Vol.337, pp.121-131, 1994
Stein, D. J., Hetherington, D. L. and Cecchi, J. L., 'Investigation of the Kinetics of Tungsten Chemical Mechanical Polishing in Potassium Iodate-Based Slurries: II. Roles of Colloid Species and Slurry Chemistry,' J. Electrochem. Soc., Vol.146, pp.1934-1938, 1999
Laursen, T and Grief, M., 'Characterization and Optimization of Copper Chemical Mechanical Planarization,' J. Electron. Mater., Vol.31, pp.1059-1065, 2002
Forsberg, M., 'Effect of Process Parameters on Material Removal Rate in Chemical Mechanical Polishing of Si(1 0 0),' Microelectron. Eng., Vol.77, pp.319-326, 2005
Kim, H. J., 'Friction and Thermal Phenomena in Chemical Mechanical Polishing,' J. Mat. Proc. Technol, Vol.130-131, pp.334-338, 2002
Sader, J. E., Chon, J. W. M. and Mulvaney, P., 'Calibration of Rectangular Atomic Force Microscope Cantilevers,' Rev. Sci. Instrum., Vol.70, pp.3967-3969, 1999
Green, C. P., 'Normal and Torsional Spring Constants of Atomic Force Microscope Cantilevers,' Rev. Sci. Instrum., Vol.75, pp.1988-1996, 1995
Ogletree, D. F., Carpick, R. W. and Salmeron, M., 'Calibration of Frictional Forces in Atomic Force Microscopy,' Rev. Sci. Instrum., Vol.67, pp.3298-3306, 1996
Cleveland, J. P., Manne, S., Bocek, D. and Hansma, P. K., 'A Nondestructive Method for Determining the Spring Constant of Cantilevers for Scanning Force Microscopy,' Rev. Sci. Instrum., Vol.64, pp.403-405, 1993
Lantz, M. A., O'Shea, S. J., Hoole, A. C. F. and Welland, M. E., 'Lateral Stiffness of the Tip and Tipsample Contact in Frictional Force Microscopy,' Appl. Phys. Lett., Vol.70, pp.970-972, 1997
Seok, J., 'Multiscale Material Removal Modeling of Chemical Mechanical Polishing,' Wear, Vol.254, pp.307-320, 2003
Lafaye, S. and Troyon, M, 'On the Friction Behaviour in Nanoscratch Testing,' Wear, Vol.261, pp.905-913, 2006
Kaupp, G., Atomic Force Microscopy, Scanning Nearfield Optical Microscopy and Nanoscratching, pp.229-252, Springer-Verlag, Berlin, 2006
Fischer-Cripps, A. C., Nanoindentation, pp.1-19, Springer-Verlag, NewYork, 2002
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.