최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기방사성폐기물학회지 = Journal of the Korean Radioactive Waste Society, v.7 no.1, 2009년, pp.9 - 16
Transport package for radioactive material should be structurally safe under puncture drop condition and its safety should be verified by test and numerical analysis. Most finite element analyses for puncture drop have been performed without modeling the impact limiter since failure is occurred in t...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
US 10 CFR Part 71, "Packaging and Transportation of Radioactive Material," (1997).
IAEA Safety Standard Series No. TS-R-1, "Regulations for the Safe Transport of Radioactive Material," (2005).
H.A. Nelms, "Structural Analysis of Shipping Casks - Effects of Jacket Physical Properties and Curvature on Puncture Resistance," Oak Ridge National Laboratory Report, ORNL/TM-1312, Vol. 3(1968).
R.C. Shieh, "Empirical Equations for Puncture Analysis of Lead-Shielded Spent Fuel Shipping Casks," Proc. of the 5th Int. Symp. on the Packaging and Transportation of Radioactive Materials, Vol. 2, pp. 341-350, Las Vegas(1978).
R.S.J. Corran, P.J. Shadbolt and C. Ruiz, "Impact Loading of Plates-An Experimental Investigation," International Journal of Impact Engineering, Vol. 1,
A.I.O Zaid, A. El-Kalay and F.W. Travis, "An Examination of the Perforation of a Mild Steel Plate by a Flat-Ended Cylindrical Projectile," International Journal of Mechanical Science, Vol. 15, pp. 129-143 (1973).
N. Jones and S.B. Kim, "A Study on the Large Ductile Deformations and Perforation of Mild Steel Plates Struck by a Mass-Part II: Discussion," Journal of Pressure Vessel Technology, Vol. 119, pp. 185-191 (1997).
E.T. Onat and R.M. Haythornthwaite, "The Load-carrying Capacity of Circular Plates at Large Deflection," Trans. of ASME, Journal of Applied Mechanics, Vol. 23, pp. 49-55 (1956).
K. Asada, M. Yamamoto, M. Ohashi, S. Hode and A. Higashino, "Development of Simplified Analysis Code for 9-m drop and 1-m Puncture Tests for a Radioactive Material Transport Cask," Waste Management' 88, pp. 135-144, Tuscon (1988).
H.M. Wen and N. Jones, "Low-velocity Perforation of Punch-impact-loaded Metal Plates," Journal of Pressure Vessel Technology, Vol. 118, pp. 181-187(1996).
T.R. Bump and Y.Y. Liu, "A Simplified Analysis of the Regulatory Puncture Test," PATRAM '95, pp. 407-414, Las Vegas (1995).
J. Altes, H. Geiser, W. Volzer, A. Frenk and G. Deeken, "Finite Element Analysis for the Impact Behaviour of a Cask Interacting with a Rigid Pin," Proc. of the 12th Int. Conf. on Structural Mechanics in Reactor Technology, pp. 77-82, Stuttgart (1993).
Y.S. Lee, C.H. Ryu, H.S. Kim and Y.J. Choi, "A Study on the Free Drop Impact of a Cask Using Commercial FEA Codes," Nuclear Engineering and Design, Vol. 235, pp. 2219-2226 (2005).
T.Y. Lo, "Puncture Evaluation of Shippingport Package," Proc. of the 9th Int. Symp. on the Packaging and Transportation of Radioactive Materials, Vol. 3, pp. 1451-1459, Washington (1989).
LS-DYNA Keyword User's Manual, Livermore Software Technology Corporation, (2005).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.