최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea, v.22 no.6, 2009년, pp.639 - 646
High-flow steel-fiber reinforced mortar may induce a certain fiber orientation distribution in the process of placing and thus have an influence on the tensile properties. In this paper, the variation of the fiber orientation distribution according to the flow of high-flow steel-fiber reinforced mor...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
고유동 강섬유보강 모르타르의 타설단계에서의 유동에 따른 모르타르 내 강섬유의 섬유 방향성 분포의 변화르 해석적으로 구한 본 연구는 어떤 결론을 나타내는가? | 본 연구에서는 고유동 강섬유보강 모르타르의 타설단계에서의 유동에 따른 모르타르 내 강섬유의 섬유 방향성 분포의 변화를 해석적으로 구하였다. 본 연구에서 고려한 형상의 구조물에 대해 주어진 해석조건으로부터 구한 해석결과에 따르면 두 평면 사이에 흐르는 모르타르의 전단흐름에 의한 섬유의 방향성 변화는 초기 150mm이내에서 크게 발생하는 것을 확인할 수 있었으며, 이후에서는 방향성 분포의 경향은 크게 변하지 않으며, 다만 흐름방향에 나란한 섬유의 밀도가 집중적으로 커지는 것을 볼 수 있었다. 섬유의 방향성과 섬유보강 복합체의 인장거동과 밀접한 관련성을 고려할 때, 이와 같은 방향성의 예측을 바탕으로 유동에 따른 고유동 강섬유 보강 모르타르의 인장거동 변화의 예측이 가능할 것으로 판단된다. | |
일반적인 섬유보강 콘크리트는 어떻게 등방성을 가지게 되는가? | 일반적인 섬유보강 콘크리트에서는 15~30mm 길이의 단섬유를 사용하여 임의방향으로 골고루 분산되도록 하여 등방성을 가지도록 한다. 그러나 고유동 강섬유보강 모르타르(HighFlow Steel-Fiber Reinforced Mortar)에서는 굵은 골재를 사용하지 않고 높은 유동성을 가지므로 타설방향 또는 구조물의 형상에 의한 유동방향에 따라 불가피하게 섬유의 방향성을 유발하게 되고, 이에 따라 섬유보강 모르타르는 비등방성을 나타내게 되어 재료의 역학적 특성 및 경화 후 구조물의 구조적 성능에 영향을 미치게 된다. | |
섬유보강 콘크리트는 콘크리트의 어떤 문제점을 개선하기 위해 사용되는가? | 콘크리트는 건설산업에서 가장 많이 사용되는 건설재료이다. 하지만 본질적으로 인장에 대해 강도가 작고 취성적 거동을 보이는 문제점을 안고 있다. 이러한 인장의 결함 및 문제점을 개선하기 위한 노력 중의 하나가 섬유보강 콘크리트(Fiber Reinforced Concrete, FRC)이다. |
Advani, S.G. (1994) Flow and Rheology in Polymer Composites Manufacturing, Elsevier Science, Amsterdam
Advani, S.G., Tucker III, C.L. (1987) The Use of Tensor to Describe and Predict Fiber Orientation in Short Fiber Composites, Journal of Rheology, 31(8), pp.751-784
Akkaya, Y., Picka, J., Shah, S.P. (2000) Spatial Distribution of Aligned Short Fibers in Cement Composites, ASCE Materials in Civil Engineering, 12(3), pp.272-279
Ausias, G., Agassant, J.F., Vincent, M. (1992) Rheology of Short Glass Fiber Reinforced Polypropylene, Journal of Rheology, 36(4), pp.525-543
Batchelor, G.K. (1970) Slender-Body Theory for Particles of Arbitrary Cross Section in Stokes Flow, Journal of Fluid Mechanics, 44, pp.419-440
Chiba, K., Nakamura, K. (1998) Numerical Solution of Fiber Suspension Flow through a Complex Channel, Journal of Non-Newtonian Fluid Mechanics, 78, pp.167-185
Chiba, K., Yasuda, K., Nakamura, K. (2001) Numerical Solution of Fiber Suspension Flow through a Parallel Plate Channel by Coupling Flow Field with Fiber Orientation Distribution, Journal of Non-Newtonian Fluid Mechanics, 99, pp.145-147
Dinh, S.M., Armstrong, R.C. (1984) A Rheological Equation of State for Semiconcentrated Fiber Suspensions, Journal of Rheology, 28, pp. 207-227
Folgar, F., Tucker III, C.L. (1984) Orientation Behavior of Fibers in Concentrated Suspensions, Journal of Reinforced Plastics and Composites, 3, pp.98-119
Fox, R.W., McDonald, A.T., Pritchard, P.J. (2004) Introduction to Fluid Mechanics, John Wiley & Sons, Inc., USA
Han, K.H., Im, Y.T. (2002) Numerical Simulation of Three-Dimensional Fiber Orientation in Short-Fiber-Reinforced Injection-Molded Parts, Journal of Materials Processing Technology, 124, pp.366-371
Jeffery, G.B. (1922) The Motion of Ellipsoidal Particles Immersed in a Viscous Fluid, Proceeding of Royal Society of London A, 102, pp.161-179
Lin, J.Z., Sun, K., Zhang, W. (2008) Orientation Distribution of Fibers and Rheological Property in Fiber Suspensions Flowing in a Turbulent Boundary Layer, Acta Mech Sin, 24, pp.243-250
Moses, K.B., Advani, S.G., Reinhardt, A. (2001) Investigation of Fiber Motion near Solid Boundaries in Simple Shear Flow, Rheol Acta, 40, pp.296-306
Naaman, A.E., Reinhardt, H.W. (1995) Characterization of High Performance Fiber Reinforced Cement Composites-HPFRCC, Proceedings of the Second International Workshop 'HPFRCD2', pp.3-6
Poitou, A., Chinesta, F., Bernier, G. (2001) Orienting Fibers by Extrusion in Reinforced Reactive Powder Concrete, Journal of Engineering Mechanics, 127(6), pp.593-598
Shah, S. P., Ouyang, C. (1991) Mechanical Behavior of Fiber-reinforced Cement-based Composites, Journal of American Ceramic Society, 74(11), pp.2727-2738
Vincent, M., Delivers, E., Agassant, J.F. (1997) Fiber Orientation Calculation in Injection Moulding of Reinforced Thermoplastics, Journal of Non-Newtonian Fluid Mechanics, 73, pp.317-326
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.