최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산유체공학회지 = Journal of computational fluids engineering, v.14 no.1 = no.44, 2009년, pp.1 - 8
이동원 ((주)STX엔진 엔진기술연구소) , 신승영 (경북대학교 대학원 기계공학과) , 조태석 (경북대학교 대학원 기계공학과) , 권영두 (경북대학교 기계공학부) , 권순범 (경북대학교 기계공학부)
To control the coating thickness of zinc in the process of continuous hot-dip galvanizing, it is known from early days that the gas wiping through an air knife system is the most effective because of the obtainable of uniformity of coating thickness, possibility of thin coating, working ability in h...
1975, 梅田昭三, 秦和宣, 山口輝雄, 今井辛義, 江原勝也, "連?亞鉛 めっき 設備," 日立評論, Vol.57, No.5, pp.427-432
1984, 原富啓, 女谷?武志, 山下正明, 田尻泰久, 小川正浩, "氣體絞 りによる 高速化成處理技術の開發," 日本鑛管技報, pp.90-97
1961, Hebek, A., "The Effect of Speed on the Thickness of the Coating Produced During Metalizing in Liquid Metals," Metal Finishing J., Vol.7, No.8, pp.298-302
1976, Thorton, J.A. and Graff, H.F., "An Analytical Description of the Jet Finishing Process for Hot-dip Metallic Coatings on Strip," Metallurgical Transactions B, Vol.7, No.12, pp.607-618
1984, Ellen, C.H. and Tu, C.V., "An Analysis of Jet Stripping of Liquid Coatings," J. of Fluid Eng., Vol.106, pp.399-404
1984, Tuck, E.O. and Broeck, J.M., "Influence of Surface Tension on Jet - stripped Continuous Coating of Sheet Materials," AIChE J., Vol.30, No.5, pp.808-811
1995, Takeishi, Y., Yamauchi, A. and Miyauchi, S., "Gas Wiping Mechanism in Hot-dip Coating Process," Iron and Steel, Vol.81, No.6, pp.643-647
1996, Tu, C.V. and Wood, D.H., "Wall Pressure and Shear Stress Measurements Beneath an Impinging Jet," Exp. Thermal and Fluid Sci., pp.364-373
2004, Dubois, M., Buchlin, J.M., Gosset, A. and Perrot, V., "Effect of Nozzle Tilting on Splashing in Jet Wiping," Galvatech'04Conf Proc., pp.197-204
1995, 武石芳明, 山內昭良, 宮內澄隆, "連?溶融めっきにおける ガスワイピング機構," 鐵と鋼, Vol.81, No.5, pp.643-648
1976, Moore, MJ. and Sieverding, C.H., "Two-Phase Steam Flow in Turbines and Separators," Hemisphere Publishing Corp., London, pp.134-135
※ AI-Helper는 부적절한 답변을 할 수 있습니다.