최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기펄프 종이기술 = Journal of Korea TAPPI, v.41 no.2 = no.130, 2009년, pp.7 - 12
원종명 (강원대학교 산림환경과학대학 제지공학과) , 신동준 (강원대학교 산림환경과학대학 제지공학과) , 김흥배 (강원대학교 산림환경과학대학 제지공학과)
The effects of refining either SwBKP or HwBKP, and both of SwBKP and HwBKP on the physical properties of paper were investigated in order to elucidate if the non-conventional refining and blending method can be used for the optimizing the paper properties. The blending ratio of SwBKP and HwBKP was 1...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
종이의 성질에 가장 큰영향을 미치는 인자는 무엇인가? | 종이의 성질에 영향을 미치는 인자로서 펄프의 특성, 고해 방법과 정도, 충전제, 보류 시스템뿐만 아니라 종이 제조에 사용되는 초지기와 관련된 다양한 조건들이 고려될 수 있다. 그 중 종이의 성질에 가장 큰영향을 미치는 인자는 펄프의 특성과 고해라 할 수 있다. 이미 잘 알려져 있는 바와 같이 펄프는 수종에 따라서 뿐만 아니라 생육 조건 등에 따라서도 매우 다양한 특성을 지니고 있다. | |
인쇄용지의 경우 어떤 펄프를 사용하는가? | 이미 잘 알려져 있는 바와 같이 펄프는 수종에 따라서 뿐만 아니라 생육 조건 등에 따라서도 매우 다양한 특성을 지니고 있다. 이러한 펄프의 선택은 제조하고자 하는 종이의 특성에 따라 달라지는데 특히 인쇄용지의 경우 인쇄적성이 가장 중요하기 때문에 양호한 지필도, 평활도 및 벌크를 부여하기 위하여 활엽수 펄프를 주원료로 사용하고 지필의 주행성 및 강도를 확보하기 위하여 장섬유에 해당하는 침엽수 펄프를 일부 혼합 사용한다. Nanko 등1)은 시판되고 있는 마켓펄프의 특성을 분석하여 제조하고자 하는 종이의 용도에 가장 적합한 특성을 지닌 펄프를 선택할 수 있는 귀중한 자료를 제공하였다. | |
펄프의 고해 및 혼합 방법을 달리하였을때 일어날 수 있는 종이의 물성에 미치는 영향을 조사한 본 연구의 결과는? | 펄프의 배합비는 침엽수 펄프 85%, 활엽수 펄프 15%로 고정하였으며, 이들 펄프 중 어느 한 가지만 고해하거나 모두 고해하여 혼합 초지를 실시하였다. 본 연구 결과 충전 여부에 관계없이 침엽수 펄프만고해하여 초지하였을 때 가장 높은 벌크가 얻어졌다. 하지만 불투명도의 경우 미충전 시에는 뚜렷한 차이가 확인되지 않았으나 충전 시에는 활엽수 펄프만 고해했을 때 가장 높은 값이 얻어졌고, 동일 벌크에서 비교할 경우에도 가장 높은 불투명도를 나타내었다. 그러나 파열 및 인장지수는 충전 여부에 관계없이 동일한 벌크에서 유사한 값을 나타내었다. 따라서 불투명 도의 개선이 요구되는 경우 활엽수 펄프만 고해하는 방법을 통하여 소기의 목적을 달성할 수 있을 것으로 기대된다. |
Nanko, H., Button, A. and Hillman, D., The World of Market Pulp, WOMP, LLC (2005)
Seth, R.S., Beating and refining response of some reinforcement pulps, TAPPI Journal 82(3):147-155 (1999)
Ebeling, K.A., Critical review of current theories for the refining of chemical pulps. Proceedings of the International Symposium on Fundamental Concepts of Refining, Project 3384, Report 3, The Institute of Paper Chemistry (1981)
Page, D.H., The beating of chemical pulps - The action and the effects, Transactions of 9th Fundamental Research Symposium, Fundamentals of Papermaking, Mechnical Engineering Publications Ltd., pp. 1-38 (1989)
Kang, T. Role of external fibrillation in pulp and paper properties, Doctoral Thesis, Helsinki University of Technology (2007)
Kerekes, R. J. and Schell, C. J., Characterization of fibre flocculation regimes by a crowding factor, J. Pulp Pap. Sci. 18(1):32-38 (1992)
Kerekes, R. J. and Schell, C. J., Effects of fiber length and coarseness on pulp flocculation, Tappi J. 78(2):133-139 (1995)
Kerekes, R. J., Perspectives on fibre flocculation in papermaking, Proc. Int. Paper Physics Conf., pp. 23-31 (1995)
Waterhouse, J. F., The effect of papermaking variables on formation, Tappi J. 76(9):129-134 (1993)
Versalyas, R., Controlling the flocculation of fibers and fillers, Paper Technology 31(7):18-22 (1990)
Jokinen, O. and Ebeling, K., Flocculation tendency of papermaking fibres, Paperi ja Puu 5:317 (1985)
Smith, M. K., Formation potential of west coast kraft pulps. Pulp Paper Can. 87(10):69 (1986)
Bhardwaj, N.K., Hoang, V., and Nguyen, K.L., A comparative study of the effect of refining on physical and electrokinetic properties of various cellulosic fibres, Bioresource Technology 98:1647?1654 (2007)
Wahren, D., Refining of hardwoods and softwoods, IPC Technical Paper Series No. 136, The Institute of Paper Chemistry (1983)
Lumiainen, J.J. and Partanen, M.T., Refining of reinforcement kraft pulp for mechanical printing papers, Proceedings of TAPPI Engineering & Papermakers Conference, pp. 353-364 (1997)
Hiltunen, E., Kettunen, H., Laine1, J.E. and Paulapuro, H., Effect of softwood kraft refining on a mechanical-chemical mixture sheet, TAPPI Journal 83(10): (2000)
Manfredi, V., Evaluation of Refining Strategies for Combined Use of Softwood and Eucalyptus Pulps in Papermaking, Proceedings of Pan Pacific Conference, pp. 37-42 (2006)
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.