$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

부분 구조물의 민감도 분석을 이용한 버스차체의 진동분석
Vibration Analysis of Bus Structure using Sensitivity Analysis of Bus Component Structures 원문보기

한국공작기계학회지 = Journal of the Korean society of machine tool engineers, v.18 no.4, 2009년, pp.355 - 361  

이상범 (국민대학교 기계자동차공학부)

Abstract AI-Helper 아이콘AI-Helper

In this paper, an analysis technique is presented for performing the effective design of bus structure. Sensitivity analysis is carried out for the natural frequency of component structures consisting of bus B.I.W. Local vibration modes of substructure, which large affect on the global vibration mod...

주제어

참고문헌 (11)

  1. Kim, H. J. and Park, Y. S., 1997, "Modal Parameter Sensitivity Analysis Using Component Mode Synthesis Method," 1997 Spring Conference Proceedings of the KSNVE, pp. 184-191. 

  2. Heo, J. H. and Ehmann, K. F., 1991, "A Method for Substruetural Sensitivity Synthesis," ASME Journal of Vibration and Acoustics, Vol. 113, pp. 201-208. 

  3. Lee, W. P., Kim, K. L., and Lee, D. M., 1996, "Dynamic Design of Machine Tool Structure by Substructure Synthesis Method," Transactions of the KSMTE, Vol. 5, No.4, pp. 82-89. 

  4. Huizinga, A. T. M. J. M., Campen, D. H., and Kraker, A., 1997, "Application of Hybrid Frequency Domain Substructuring for Modeling and Automotive Engine Suspension," Journal of Vibration and Acoustics, Vol. 119, pp. 304-310. 

  5. MSC/NASTRAN, 1997, MSC/NASTRAN Superelement Analysis Seminar Notes, MacNeal-Schwendler Corporation, Los Angeles, CA. 

  6. Vanderplaats, G. N. and Hansen, S. R., 1989, DOT Users Manual, Engineering Design Optimization, Inc., Santa Barbara, CA. 

  7. Lee, H. Y., 1995, Stiffness Analysis and Optimal Design of Thin Walled Beam Structures," Master Thesis, Kookmin University, Republic of Korea. 

  8. Lee, S. B. and Yim, H. J., 2004, "Analysis of Dynamic Characteristics Change of Middle-sized Bus by Attachment of Trim Components," Transactions of the KSMTE, Vol. 13, No.1, pp. 88-93. 

  9. Vanderplaats, G. N., 1984, Numerical Optimization Techniques for Engineering Design, McGraw-Hili Book Co., New York. 

  10. Gregory, J. M., 1993, MSC/NASTRAN Design Sensitivity and Optimization User's Guide, MacNeal -Schwendler Corporation, Los Angeles, CA. 

  11. Yim, H. J. and Lee, S. B., 1995, "Technology for Initial Design and Analysisof Vehicle Pillar Structures for Vibration," Transactions of the KSNVE, Vol. 5, No.3, pp. 395-402. 

저자의 다른 논문 :

관련 콘텐츠

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로