$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

LBM을 이용한 쇄기형 물체 주위의 유동특성
Fluid Flow Behaviors around Wedge-shaped Body using Lattice Boltzmann Method 원문보기

한국동력기계공학회지 = Journal of the korean society for power system engineering, v.13 no.4, 2009년, pp.24 - 30  

무하마드아부타헤르 (부경대학교 대학원) ,  정호윤 (부경대학교 대학원) ,  이연원 (부경대학교 기계공학부)

초록
AI-Helper 아이콘AI-Helper

본 연구에서는 기존에 널리 사용되어져 온 Wavier-Stokes 방정식을 풀이하는 전통적인 CFD 해석에서 벗어나 최근에 그 응용 분야를 넓혀가고 있는 LBM의 해석코드를 개발하고, 이를 이용하여 이차원 채널속에 놓여진 쇄기형 물체 주위의 유동특성을 조사하였다. D2Q9 격자계 및 Bhatnagar-Gross-Krook (LBGK) 모델을 채택하였으며, 수치해석 결과는 기존의 실험결과의 잘 일치하였다. 쇄기형 물체에서 와의 형성 및 방출 Reynolds 수 범위는 $32{\leq}Re{\leq}620$ 이며, 원형실린더에서 알려진 Karman 와열을 형성하는 주기적인 와방출은 대칭적인 와가 형성된 후 $Re{\geq}85$부터 시작되며 Reynolds 수의 증가에 따라 와 방출 주파수는 증가되었다.

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

문제 정의

  • As far we know, the problem has been considered before. The objective of this paper is to numerically study of fluid flow behavior around wedge-shaped body where the flow can be driven with the pressure (density) gradients. Here we have fcxused our attention on the evolution of streamlines, vorticity contours, pressure contours as well as velocity profiles and vortex shedding frequency, to investigate the imjx)rtant characteristics of the flow field around wede-shaped body, for a wide range of non-dimensional pai*ameters, namely the Reynolds number (Re) and the Strouhal number (St), based on the characteristic length of the body, the maximum incoming flow velocity (less then Ollu )and also the nature of fluid transport properties.
본문요약 정보가 도움이 되었나요?

참고문헌 (11)

  1. G. R. McNamara and G. Zanetti, 1988, "Use of the Boltzmann equation to simulate lattice-gas automata", Physical Review Letters, Vol 61, pp. 2332-2335. 

  2. H. Chen, S. Chen and W. H. Matthaeus, 1992, "Recovery of the Navier-Stokes equations usmg a lattice-gas Boltzmann method", Physi- cal Review A, Vol. 45 No.8, pp. 5339 - 5342. 

  3. Y. Qian, H. D. D'Humieres and P. Lallemand, 1992, "Lattice BGK models for Navier-Stokes equation", Euro physics Letter, Vol. 17, No.6, pp. 479-484. 

  4. S. Chen and G. D. Doolen, 1998, "Lattice Boltzmann method for fluid flows", Annu. Rev. Fluid Mechanics, Vol. 30, pp. 329 - 364. 

  5. S. Succi, 2001, "The lattice Boltzmann equation for fluid dynamics and beyond" Oxford University press. 

  6. M. C. Suukop and D. T. Thome, 2006, "Lattice Boltzmann modeling, An introduction for geoscientist and engineering", Springer. Heidelberg. 

  7. C. H. K. Williamson, 1988, "Defining a universal and continuous Strouhal - Reynolds number relationship for a laminar vortex shedding of a circular cylinder", Physics of Fluid. Vol. 31, No. 10, pp. 2742-274. 

  8. D. L. Young, J L Huang and T. I. Eldho, 2001, "Simulation of laminar vortex flow past cylinders using a coupled BEM and FEM model", Comput. Methods Appl. Mecha. Engg., Vol. 190, pp. 5975 - 5998. 

  9. An-B. Wang, Z. Travrucek, and K-C. Chia, 2000, "On the relationship of effective Reynolds number and Strouhal number for the laminar vortex shedding of a heated circular cylinder", Physics of fluid, Vol. 12, No.6, pp. 1401-1410. 

  10. P. J Strykowski and K. R. Sreenivasan, 1990, "On the formation and suppression of vortex 'shedding' at low Reynolds numbers", J Fluid Mechanics, Vol. 21B, pp. 71 -107. 

  11. S. E. Rogers, and D. Kwak, 1990, "Up wind differencing scheme for the time-accurate incompressible Navier-Stokes equations", AlAA Journal, Vol. 28, No.2, pp. 253-262. 

저자의 다른 논문 :

LOADING...

관련 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로