최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.26 no.10 = no.223, 2009년, pp.12 - 17
소범식 ((재) 경북하이브리드부품연구원) , 고태조 (영남대학교 기계공학부)
초록이 없습니다.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Erdim, H., Lazoglu, I. and Ozturk, B., 'Feedrate scheduling strategies for free-form surfaces,' International Journal of Machine Tools & Manufacture, Vol. 46, No. 7-8, pp. 747-757, 2006
CGTech, http://vericut.com/
So, B. S., Jung, Y. H., Kurfess, T. R. and Hwang, S. M., '5-Axis machining speed enhancement by step length optimization,' Journal of Materials Processing Technology, Vol. 187-188, pp. 2-5, 2007
Fleisig, R. V. and Spence, A. D., 'A constant feed and reduced angular acceleration interpolation algorithm for multi-axis machining,' Computer-Aided Design, Vol. 33, No. 1, pp. 1-15, 2001
Xu, H. Y., 'Linear and angular feedrate interpolation for planar implicit curves,' Computer-Aided Design, Vol. 35, No. 3, pp. 301-317, 2003
Muller, M., Erdos, G. and Xirouchakisa, P., 'High accuracy spline interpolation for 5-axis machining,' Computer-Aided Design, Vol. 36, No. 13, pp. 1379-1393, 2004
Maropoulos, P. G., Baker, R. P. and Paramor, K. Y. G., 'Integration of tool selection with design Part 2: Aggregate machining time estimation,' Journal of Materials Processing Technology, Vol. 107, No. 1, pp. 135-142, 2000
So, B. S., Jung, Y. H., Park, J. W. and Lee, D. W., 'Five-axis machining time estimation algorithm based on machine characteristics,' Journal of Materials Processing Technology, Vol. 187-188, pp. 37-40, 2007
Affouard, A., Duc, E., Lartigue, C., Langeron, J. M. and Bourdet, P., 'Avoiding 5-axis singularities using tool path deformation,' International Journal of Machine Tools & Manufacture, Vol. 44, No. 4, pp. 415-425, 2004
Cheng, M. Y., Tsai, M. C. and Kuo, J. C., 'Real-time NURBS command generators for CNC servo controllers,' International Journal of Machine Tools & Manufacture, Vol. 42, No. 7, pp. 801-813, 2002
Choi, B. K., Park, J. W. and Jun, C. S., 'Cutterlocation data optimization in 5-axis surface machining,' Computer-Aided Design, Vol. 25, No. 6, pp. 377-386, 1993
Lo, C. C., 'A tool-path control scheme for five-axis machine tools,' International Journal of Machine Tools & Manufacture, Vol. 42, No. 1, pp. 79-88, 2002
※ AI-Helper는 부적절한 답변을 할 수 있습니다.