최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.26 no.10 = no.223, 2009년, pp.108 - 115
김산하 (서울대학교 기계항공공학부) , 정도관 (서울대학교 기계항공공학부) , 김보현 (숭실대학교 기계공학부) , 오광환 (광주과학기술원 정보기전공학부) , 정성호 (광주과학기술원 정보기전공학부) , 주종남 (서울대학교 기계항공공학부)
Although nanosecond pulsed laser drilling and milling are rapid and non-wear processes in micromachining, the quality cannot meet the precision standard due to the recast layer and heat affected zone. On the other hand, electrical discharge machining (EDM) is a well-known high precision machining pr...
Yu, Z. Y., Masuzawa, T. and Fujino, M., "Micro-EDM for Three-Dimensional Cavities - Development of Uniform Wear Method- ," Annals of the CIRP, Vol. 47, No. 1, pp. 169-172, 1997
Chung, D. K., Kim, B. H. and Chu, C. N., "Micro Electrical Discharge Milling Using Deionized Water as a Dielectric Fluid," Journal of Micromechanics and Microengineering, Vol. 17, No. 5, pp. 867-874, 2007
Tonshoff, H. K., Alvensleben, F., Ostendprf, A., Kamlage, G. and Nolte, S., "Micromachining of Metals Using Ultrashort Laser Pulses," International Journal of Electrical Machining, No. 4, pp. 1-6, 1999
Meijer, J., Du, K., Gilner, A., Hoffmann, D., Kovalenko, V. S., Masuzawa, T., Ostendon, A., Poprawe, R. and Schulz, W., "Laser Machining by Short and Ultrashort Pulses, State of the Art and New Opportunities in the Age of the Photons," Annals of the CIRP, Vol. 51, No. 2, pp. 531-550, 2002
Allen, D. M. and Huang, S. X., "The Reduction of Tool Wear and Machining Time for the Micro-Electro Discharge Machining of Micro-holes by Using Copper Vapour Laser Machining as a Roughing Process," International Journal of Electrical Machining, No. 2, pp. 9-11, 1997
Li, L., Diver, C., Atkinson, J., Giedl-Wagner, R. and Helml, H. J., "Sequential Laser and EDM Microdrilling for Next Generation Fuel Injection Nozzle Manufacture," Annals of the CIRP, Vol. 55, No. 1, pp. 179-182, 2006
Masuzawa, T., Fujimoto, M. and Kobayashi, K., "Wire Electro-Discharge Grinding for Micro machining," Annals of the CIRP, Vol. 34, No. 1, pp. 431-434, 1985
Lee, B. U., Yi, S. M., Kim, B. H. and Chu, C. N., "Fabrication of 3D Micro structure Using Micro Electrical Discharge Milling," Journal of the KSPE, Vol. 21, No. 9, pp. 41-47, 2004
Tsai, Y. Y., Masuzawa, T. and Fujino, M., "Investigations on Electrode Wear in Micro-EDM," Proceedings of the International Symposium on Electromachining(ISEM XIII), pp. 719-726, 2001
※ AI-Helper는 부적절한 답변을 할 수 있습니다.