$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

풀비등과 저Re수 흐름비등에서의 기포의 형상과 성장에 대한 연구
Study on the Relationships between Single Bubble Growth Behavior and Bubble Shape Assumption in Pool and low-He Flow Boiling 원문보기

한국태양에너지학회 논문집 = Journal of the Korean Solar Energy Society, v.29 no.3, 2009년, pp.73 - 82  

김정배 (충주대학교 에너지시스템공학과)

초록
AI-Helper 아이콘AI-Helper

포화상태 핵비등과 저 Re수의 흐름비등에서 얻어진 실험결과를 바탕으로 하여, 기포가 성장하는 동안의 등가 기포 직경과 열전단율의 거동에 대한 기포 형상 가정의 효과를 제시하기 위한 해석적인 연구를 수행하였다. 이러한 목적을 달성하기 위하여, 등가 기포 반경이 기포가 성장하는 동안 촬영된 기포의 이미지로부터 얻어질 수 있는 형상 가정을 이용하여 계산되었다. 그리고 열전달율을 포화상태 핵비등 동안 미세크기의 히터와 휘스톤브리지 회로를 이용하여 측정하였다. 그리고, 기포 형상 가정의 효과를 실험결과와 비교하였고, 이를 통해 단일 기포의 성장 거동을 분석하기 위한 기포 형상 가정이 매우 중요함을 보였다.

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

가설 설정

  • Results of our method for calculating equivalent bubble radius will be compared with these of other previous methods and be compared for heat flow rate behavior characteristics to decide how method is reasonable.
  • Compared with the contact angle for distilled water, R113 showed more hydrophilic characteristics. The dynamic characteristics of a boiling bubble is supposed to be different with the static contact angle, but the result of the static contact angle measurement could give the expectation that a boiling bubble of R113 would have more spherical shape.
본문요약 정보가 도움이 되었나요?

참고문헌 (9)

  1. Han C. H. and Griffith, P. 1965. The mechanisim of heat transfer in nucleate pool boiling-Part I bubble initiation, growth and departure. Int. J. Heat Mass Transfer, Vol. 8, pp. 887-904 

  2. Cole, R. and Shulman, H. L. 1966. Bubble growth rate at high jakob numbers Int. J, Heat Mass Transfer, Vol. 9, pp.1377-1390 

  3. Stewart, J. K. and Cole, R. 1972. Bubble growth rates during nucleate boiling at high jakob numbers. Int. J. Heat Mass Transfer, Vol. 15, pp. 655-663 

  4. van Stralen, S. J. D., Cole, R., Sluyter, W.M. and Sohal, M.S. 1975. Bubble growth rates in nucleate boiling of water at sub-atmospheric pressures. Int. J. Heat Mass Transfer, Vol. 18, pp. 655-669 

  5. Rule, T. D., Kim, J. and Kalkur, T.S. 1998. Design, construction and qualification of a microscale heater array for use in boiling heat transfer, NASA/CR-1998-207407 

  6. Rule, T. D. and Kim, J. 1999. Heat transfer behavior on small horizontal heaters during pool boiling. J. of Heat Transfer, Vol. 121, No 2, pp. 386-393 

  7. Bae, S. W., Kim, J. and Kim, M. H. 1999. Improved technique to measure time -and space- resolved heat transfer under single bubble during saturated pool boiling of FC-72. Experimentsl Heat Transfer, Vol.12, No 3, pp.265-279 

  8. Coleman, H. W. and Steele Jr., W. G. 1989. Experimentation and uncertainty analysis for enginners. John Wiley & Sons Inc., New York, U.S.A 

  9. Lee, J., Cho, K., Song, I. S., Kim, C. B. and Son, S. Y. 2003. Microscale Bubble Nucleation from an Artificial Cavity in Single Microchannel. ASME J. of Heat Transfer, Vol. 125, pp. 545. 

관련 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로