최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓土木學會論文集, Journal of the Korean Society of Civil Engineers. A. 구조공학, 원자력공학, 콘크리트공학, v.30 no.3A, 2010년, pp.317 - 328
양인환 (군산대학교 토목공학과) , 조창빈 (한국건설기술연구원 구조교량연구실)
The method to evaluate the flexural capacity of steel fiber-reinforced ultra high strength concrete beams was proposed in this study. An experimental program was set up and fourteen beams have been tested. Test results were compared with predictions by design code and by the proposed method, respect...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
일반콘크리트의 한계를 극복하기 위해 어떻게 하였는가? | 그러나, 기존의 시멘트계 재료로만 구성된 일반콘크리트는 인장강도와 휨강도가 낮고 취성파괴의 성질을 나타내고 있어, 요구되는 여러 성능을 만족시키는데 한계가 있다. 기존 콘크리트의 이러한 한계점을 극복하기 위해 콘크리트에 강섬유를 혼입한 강섬유보강 콘크리트에 대한 적용이 증가하고 있다. 강섬유보강 콘크리트는 콘크리트의 휨강도, 전단강도를 증가시킬 뿐만 아니라, 인성, 연성, 피로 및 충격에 대한 저항능력을 향상시킨다. | |
기존의 시멘트계 재료로만 구성된 일반콘크리트의 한계는 무엇인가? | 구조물의 장대화, 고층화, 대형화에 따라 콘크리트 재료에 고강도, 고성능, 고내구성 등의 여러 성능이 요구되고 있다. 그러나, 기존의 시멘트계 재료로만 구성된 일반콘크리트는 인장강도와 휨강도가 낮고 취성파괴의 성질을 나타내고 있어, 요구되는 여러 성능을 만족시키는데 한계가 있다. 기존 콘크리트의 이러한 한계점을 극복하기 위해 콘크리트에 강섬유를 혼입한 강섬유보강 콘크리트에 대한 적용이 증가하고 있다. | |
콘크리트 재료에 어떤 성능이 요구되고 있는가? | 구조물의 장대화, 고층화, 대형화에 따라 콘크리트 재료에 고강도, 고성능, 고내구성 등의 여러 성능이 요구되고 있다. 그러나, 기존의 시멘트계 재료로만 구성된 일반콘크리트는 인장강도와 휨강도가 낮고 취성파괴의 성질을 나타내고 있어, 요구되는 여러 성능을 만족시키는데 한계가 있다. |
오영훈, 김정해(2008) 전단보강이 없는 강섬유보강 콘크리트 휨부재의 휨 및 전단강도의 평가, 콘크리트학회논문집, 한국콘크리트학회, 제20권 제2호, pp. 257-267.
한국건설기술연구원(2005) 초고성능 시멘트 복합체를 이용한 교량 거더 개발.
한국콘크리트학회(2007) 콘크리트구조설계기준.
Alsayed, S.H. (1993) Flexural deflection of reinforced fibrous concrete beams, ACI Structural Journal, Vol. 90, No. 1, pp. 72-76.
American Concrete Institute (2005) Design considerations for steel fiber reinforced concrete, ACI 544.4R-88, ACI Manual of Concrete Practice, Detroit, pp. 544.4R-1-544.4R-18.
Ashour, S.A. and Waff, F.F. (1993) Flexural behavior of highstrength fiber reinforced concrete beams, ACI Structural Journal, Vol. 90, No. 3, pp. 279-287.
Association Francaise du Genil Civil (2002) Betons fibres a ultrahautes performances. Association Francaise du Genil Civil (AFGC), SETRA, France.
Casanova, P. and Rossi, P. (1999) Analysis of metallic fibre-reinforced concrete beams submitted to bending, Materials and Structures, Vol. 29, No. 190, pp. 354-361.
Chunxiang, Q. and Patnaikuni, I. (1999) Properties of high-strength steel fiber-reinforced concrete beams in bending, Cement & Concrete Composites, Vol. 21, No. 21, pp. 73-81.
Craig, R.J. (1987) Flexural behavior and design of reinforced fibrous concrete members, ACI SP 105-28, pp. 517-563.
Hassoun, M.N. and Sahebjam, K. (1985) Plastic hinge in two-span reinforced concrete beams containing steel fibers, Proceedings of Canadian Society of Civil Engineers, Montreal pp. 119-139.
Henager, C.H. and Doherty, T.J. (1976) Analysis of reinforced concrete beams, ASCE Journal, Vol. 102, No. ST1, pp. 177-188.
Hillerborg, A., Modeer, M., and Petersson, P.E. (1976) Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement and Concrete Research, Vol. 6, No. 6, pp. 773-782.
Japan Concrete Institute (2003) Method of test for fracture energy of concrete by use of notched beam, JCI-S-002-2003, http://www.jci-web.jp/jci_standard
Jindal, R.L. (1984) Shear and moment capacities of steel fiber reinforced concrete beams, ACI SP 81-1, pp. 1-6.
Kitsutaka, Y. (1997) Fracture parameters by polylinear tension-softening analysis. Journal of Engineering Mechanics, ASCE, Vol. 123, No. 5, pp. 444-450.
Manfred, T. and Jens, G. (2008) Bending design of steel-strengthened UHPC, Proceedings of 2nd International Symposium on Ultra High Performance Concrete, Germany, Kassel, pp. 523-532.
Mehta, P.K. and Monteiro, J.M. (2006) Concrete - Microstructures, Properties, and Materials, McGraw-Hill, pp. 76-78.
Naaman, A.E. and Reinhardt, H.W. (2006) Proposed classification of HPFRC composites based on their tensile response, Materials and Structures, Vol. 39, No. 5, pp. 547-555.
Oh, B.H. (1992) Flexural analysis of reinforced concrete beams containing steel fibers, Journal of Structural Engineering, ASCE, Vol. 118, No. 10, pp. 2812-2863.
Pearlman, S.L. (1979) Flexural performance of reinforced steel fiber concrete beams, MS thesis, Carnegie-Mellon University, Pittsburgh.
Si-Larbi, A., Ferrier, E., and Hamelin, P. (2008) Flexural behavior of ultra high performance concrete reinforced with short fibers and FRP Rebars, Proceedings of 2nd International Symposium on Ultra High Performance Concrete, Kassel, Germany, pp. 661-672.
Swamy, R.N. and Al-Taan, S.A. (1981) Deformation and ultimate strength in flexure of reinforced concrete beams made with steel fiber concrete, ACI Structural Journal, Vol. 78, No. 5, pp. 395-405.
Tue, N.V., Schneider, H., Simsch, G., and Schmidt, D. (2004) Bearing capacity of stub columns made of NSC, HSC and UHPC confined by a steel tube, Proceedings of international symposium on high performance concrete ; ultra high performance concrete, Kassel, Germany, pp. 339-350.
Uchida, Y. and Barr, B.I.G. (1998) Tension softening curves of concrete determined from different test specimen geometrics. Proceedings of Fracture Mechanics of Concrete Structures (FraMCos-2), Gifu, Japan, pp. 87-398.
Williamson, G.R. (1973) Compression characteristics and structural beam design analysis of steel fiber reinforced concrete, Technical Report No. M-62, U.S. Army Construction Engineering Research Lab., Champaign.
Yuguang, Y., Walraven, J., and Uiji, J.D. (2008) Study on bending behavior of an UHPC overlay on a steel orthotropic deck, Proceedings of 2nd International Symposium on Ultra High Performance Concrete, Germany, pp. 639-646.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.