최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국소음진동공학회논문집 = Transactions of the Korean society for noise and vibration engineering, v.20 no.1 = no.154, 2010년, pp.10 - 21
이준희 (한양대학교 대학원 기계공학과) , 유홍희 (한양대학교 기계공학부)
Equations of chordwise and flapwise bending motions for the vibration analysis of rotating pre-twisted blades having tapered cross section and setting angle are derived by using hybrid deformation variable modeling. The two motions are couples to each other due to the pre-twisted angle of the beam c...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
회전 블레이드와 관련이 있는 분야는 어떤 것들이 있는가? | 회전 블레이드는 발전용 터빈 블레이드, 헬리콥터의 날개, 인공위성 안테나 그리고 풍력 발전기의 블레이드 등의 회전운동을 하는 시스템의 모델로 사용되어왔다. 그리고 원심력을 받는 구조물의 동적 안정성과 진동에 관한 연구는 기계공학, 항공우주공학 그리고 토목공학 등 많은 분야에 걸쳐 연구자들의 관심의 대상이 되어왔고, 이러한 구조물의 회전운동이 진동특성의 변화에 미치는 영향을 예측하기 위한 연구가 많이 이루어져 왔다. | |
회전운동을 하는 구조물들이 가지고 있는 것은? | 회전운동을 하는 대부분의 구조물들은 불균일한 단면형상과 초기 비틀림각 그리고 허브에 장착되어 있는 자세각인 장착각을 가지고 있다. 이때 위의 조건들로 만들어진 구조물은 회전운동을 함에 따라 시스템의 동적 특성 변화를 일으키게 된다. | |
회전 블레이드는 어떻게 사용되어왔는가? | 회전 블레이드는 발전용 터빈 블레이드, 헬리콥터의 날개, 인공위성 안테나 그리고 풍력 발전기의 블레이드 등의 회전운동을 하는 시스템의 모델로 사용되어왔다. 그리고 원심력을 받는 구조물의 동적 안정성과 진동에 관한 연구는 기계공학, 항공우주공학 그리고 토목공학 등 많은 분야에 걸쳐 연구자들의 관심의 대상이 되어왔고, 이러한 구조물의 회전운동이 진동특성의 변화에 미치는 영향을 예측하기 위한 연구가 많이 이루어져 왔다. |
Southwell, R. and Gough, F., 1921, “The Free Transverse Vibration of Airscrew Blades,” British A.R.C. Reports and Memoranda No. 766.
Schilhansl, M., 1958, “Bending Frequency of a Rotating Cantilever Beam,” J. of Appl. Mech. Trans. Am. Soc. Mech. Engrs, 25, pp. 28-30.
Putter, S. and Manor, H., 1978, “Natural Frequencies of Radial Rotating Beams,” J. Sound and Vibration, Vol. 56, No. 2, pp. 175-185.
Buffinton, K. and Kane, T., 1985, “Dynamics of a Beam Moving Over Supports,” International Journal of Solids and Structures, Vol. 21, No. 7, pp. 617-643.
Kane, T., Ryan, R. and Banerjee, A., 1987, “Dynamics of Cantilever Beam Attached to a Moving Base,” Journal of Guidance, Control and Dynamics, Vol. 10, No. 2, pp. 139-151.
Lai, S., 1994, “Nonlinear Finite Element modeling of a High Speed Rotating Timoshenko Beam Structure,” International Journal of Mechanical Science, Vol. 36, No. 9, pp. 849-861.
Lee, S. Y. and Kuo, Y. H., 1991, “Elastic Stability of Non-uniform Columns,” Journal of Sound and Vibration, Vol. 148, No. 1, pp. 11-24.
Rossi, R. E., Laura, P. A. and Gutierrez, R. H., 1990, “A Note on Transverse Vibrations of a Timoshenko Beam of Non-uniform Thickness Clampes at One End and Carrying a Concentrated Mass at the Other,” Journal of Sound and Vibration, Vol. 143, No. 3, pp. 491-502.
Kane, T. and Levinson, D., 1985, Dynamics : Theory and Applications, McGraw-Hill Book Co., NewYork, N.Y.
Yoo, H. H., 1991, “A Linear Dynamic Modeling using Hybrid Deformation Variables for Rotating Structures,” J. of KSAS, Vol. 19, No. 3, pp. 32-39.
Yoo, H. H., 1998, “Vibration Analysis of Rotating Cantilever Beams,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 8, No. 5, pp. 765-774.
Yoo, H., Ryan, R. and Scott, R., 1995, “Dynamics of flexible Beams Undergoing Over-all Motions,” Journal of Sound and Vibration, Vol. 181, No. 2, pp. 261-278.
Carnegie, W. and Thomas, J., 1972, “The Coupled Bending-bending Vibration of Pre-twisted Tapered Blading,” Journal of Engineering for Industry, Vol. 94, pp. 255-266.
Dokumaci, E., Thomas, J. and Carnegie, W., 1967, “Matrix Displacement Analysis of Coupled Bending-bending Vibrations of Pre-twisted Blading,” Journal of mech. Eng. Sci, Vol. 9, pp. 247-51.
Ramamurti, V. and Kielb, R., 1984, “Natural Frequencies of Twisted Rotating Plates,” Journal of Sound and Vibration, Vol. 97, pp. 429-49.
Leissa, A., 1974, “On a Curve Veering Aberration,” Journal of Applied Mathematics and Physics (ZAMP), Vol. 25, pp. 99-11.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.