최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.34 no.3 = no.294, 2010년, pp.251 - 258
이환용 (인제대학교 나노공학부) , 한송이 (인제대학교 나노공학부) , 한기호 (인제대학교 나노공학부)
This paper presents the technology for the design, fabrication, and characterization of a microfluidic system interface (MSI); the purpose of this technology is to enable the integration of complex microfluidic systems. The MSI technology can be applied in a simple manner for realizing complex arran...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
미소유체소자와 하이브리드형으로 집적되는 미소밸브가 가지고 있는 단점을 극복하기 위해 개발된 미소밸브와 그 한계는? | 지금까지 다양한 형태의 미소밸브가 실리콘을 이용하여 개발(24)되었으나, 이들 밸브는 미소유체소자와 하이브리드형(hybrid type)으로 집적되기 때문에 flow volume이 큰 단점이 있었다. 이러한 문제를 해결하기 위해 PDMS (poly- dimethylsiloxane)와 같은 탄성중합체를 이용한 일체형 미소밸브들이 개발 (8,25~27)되었으나 PDMS의 소수성과 다공성(28,29)으로 인해 이의 응용분야의 한계가 제기되고 있다. 또한 PDMS 의 자가 형광특성(8)으로 인해 고감도형광측정을 요구하는 분야에도 제한되어왔다. 반면 유리기반의 미소유체소자는 고감도형광측정에 적용(30~32) 될 수 있을 뿐만 아니라 고온 열 접합기술로 제작됨으로써 높은 물리적 강도, 유체압력, 그리고 온도가 요구되는 분야에 적용가능하게 된다. | |
다기능 미소유체시스템 패키징 기술개발의 어려움을 주는 과정은 무엇인가? | 다기능 미소유체시스템 패키징 기술개발의 어려움 중 하나는 시료를 주입/배출하거나 단일기능영역 사이를 연결하는 인터커넥터를 구현하는 것이다. 지금까지 다양한 종류의 인터커넥터 기술들이(10~22) 개발되었으나, 이들 대부분은 dead volume이 크고, 공정이 까다로우며, 접착제를 사용할 경우 채널이 오염되는 문제가 있었다. | |
스테레오리소그라피 기술이란? | 스테레오리소그라피(stereolithography)기술은 광경화수지에 레이저빔을 조사하여 3차원 구조물을 제작할 수 있는 기술로써, 복잡한 미소유체시스템의 인터커넥터를 구현하기 위한 유용한 방법이다. 즉, 스테레오리소그라피 기술을 이용하면 3차원 구조물을 쉽고 빠르게 제작할 수 있으며, 전기적, 기계적, 광학적 요소들을 집적시킬 수 있고, 제작된 MSI (microfluidic system interface)를 미소유체시스템에 쉽게 정렬할 수 있다. |
Terry, S. C., Jerman, J. H. and Angell, J. B., 1979, "A Gas Chromatographic Air Analyzer Fabricated on Silicon Wafer," IEEE Trans. Electron. Devices, Vol. ED-26, No. 12, pp. 1880-1886
Bakajin, O., Duke, T. A. J., Tegenfeldt. J., Chou, C.-F., Chan, S. S., Austin, R. H. and Cox, E. C., 2001, "Separation of 100-Kilobase DNA Molecules in 10 Seconds," Anal. Chem., Vol. 73, No. 24, pp. 6053-6056.
Huang, Y., Joo, S., Duhon, M., Heller, M., Wallace, B. and Xu, X., 2002, "Dielectrophoretic Cell Separation and Gene Expression Profiling on Microelectronic Chip Arrays,'' Anal. Chem., Vol. 74, No 14, pp. 3362-3371.
Fu, A. Y., Spence, C., Scherer, A., Arnold, F. H. and Quake, S. R., 1999, "A Microfabricated Fluorescence-Activated Cell Sorter," Nat. Biotechnol., Vol. 17, No. 11, pp. 1109-1111.
Chang, K. S., Tanaka, S., Chang, C. L. and Esashi, M., 2003, "Combustor-Integrated Micro-Fuel Processor with Suspended Membrane Structure," Tech. Dig. 12th Int. Conf. Solid-State Sensors and Actuators Workshop(Transducers), Boston, USA, pp. 653-638.
Han, K.-H. and Frazier, A. B., 2006, "Paramagnetic Capture Mode Magnetophoretic Microseparator for High Efficiency Blood Cell Separations," Lab Chip, Vol. 6, pp. 265-273
Man, P. F., Jones, D. K. and Mastrangelo, C. H., 1997, "Microfluidic Plastic Capillaries on Silicon Substrates: A New Inexpensive Technology for Bioanalysis Chip," Proc. IEEE Micro Electro Mechanical Systems Conference (MEMS), Nagoya, Japan, pp. 311-316.
Grover, W. H., Skelley, A. M., Lui, C. N., Lagally, E. T. and Mathies, R. A., 2003, "Monolithic Membrane Valve and Diaphragm Pumps for Practical Large-Scale Integrated into Glass Microfluidic Devices," Sens. Actuators B, Vol. 89, No. 3, pp. 315-323.
Han, A., Wang, O., Graff, M., Mohanty, S. K., Edwards, T. L., Han, K.-H. and Frazier, A. B., 2003, "A Multi-Layer Plastic/Glass Microfluidic Systems Containing Electrical and Mechanical Functionality," Lab Chip, Vol. 3, No. 3, pp. 150-157.
Fredrickson, C. K. and Fan, Z. H., 2004, "Macro-to-Micro Interfaces for Microfluidic Devices," Lab Chip, Vol. 4, No. 6, pp. 526-533.
Stachowiak. T. B., Bohr, T., Hilder, E. F., Peterson, D. S., Yi, M., Svec, F. and Frechet, J. M. J., 2003, "Fabrication of Porous Polymer Monoliths Covalently Attached to the Walls of Channels in Plastic Microdevices," Electrophoresis, Vol. 24, No. 21, pp. 3689-3693.
Pattekar, A. V. and Kothare, M. V., 2003, "Novel Microfluidic Interconnectors for High Temperature and Pressure Application," J. Micromech. Microeng., Vol. 13, No. 2, pp 337-345.
Chen, H., Acharya, D., Gajraj, A. and Meiners, J.-C., 2003, "Robust Interconnects and Packaging for Microfluidic Elastomeric Chips," Anal. Chem., Vol. 75, No. 19, pp. 5287-5291.
Gray, B. L., Jaeggi, D., Mourlas, N. J., van Drieenhuizen, B. P., Williams, K. R., Maluf, N. I. and Kovacs, G. T. A., 1999, "Novel Interconnection Technologies for Integrated Microfluidic System," Sens. Actuators A, Vol. 77, No. 1, pp. 57-65.
Nittis, V., Fortt, R., Legge, C. H. and de Mello, A. J., 2001, "A High-Pressure Interconnect for Chemical Microsystem Applications," Lab chip, Vol. 1, No. 2, pp. 148-152.
Verlee, D., Alcock, A., Clark, G., Huang, T. M., Kantor, S., Nemcek, T., Norlie, J., Pan, J., Walsworth, F. and Wong, S. T., 1996, "Fluid Circuit Technology: Integrated Interconnect Technology for Miniature Fluidic Device," in Tech. Dig. Solid-State Sensor and Actuator, Hilton Head, SC, pp. 9-14
Yao, T. -J., Lee, S., Fang, W. and Tai, Y.-C., 2000, "Micromachined Rubber O-ring Micro-Fluidic Couplers," in Proc. IEEE Micro Electro Mechanical Systems Conf. (MEMS), MiyaZaki, Japan, pp. 624-627.
Meng, E., Wu, S. and Tai, T.-C., 2000, "Micromachined Fluidic Couplers," in Proc. Micro Total Analysis Systems Symp. ( $_{mu}{TAS}$ ), Enschede, Netherlands, pp. 41-44.
Gonzalez, C., Collins, S. D. and Smith, R. S., 1998, "Fluidic Interconnects for Modular Assembly of Chemical Microsystems," Sens. Actuators B, Vol. 49, No. 1-2, pp. 40-45.
Gray, B. L., Cillins, S. D. and Smith, R. S., 2004, "Interlocking Mechanical and Fluidic Interconnections for Microfluidic Circuit Boards," Sens. Actuators B, Vol. 112, No. 1, pp. 18-24.
Puntambekar, A. and Ahn, C. H., 2002, "Self-Aligning Microfluidic Interconnects for Glass- and Plastic-Based Microfluidic Systems," J. Micromech. Microeng., Vol. 12, No. 1, pp. 35-40.
Yang, Z. and Maeda, R., 2003, "Socket with Built-in Valves for the Interconnection of Microfluidic Chips to Macro Constituents," J. Chromatogr. A, Vol. 1013, No. 1-2, pp. 29-33.
Bertsch, A., Lorenz, H. and Renaud, P., 1999, "3D Microfabrication by Combining Microstereolithography and Thick Resist UV Lithography," Sens. Actuators A, Vol. 73, No. 1-2, pp. 14-23.
Kovacs, G. T. A., 1998, Micromachined Transducers Sourcebook. New York: McGraw-Hill.
Hosokawa, K. and Maaeda, R., 2000, "A Pneumatically-Actuated Three-Way Microvalve Fabricated with Polydimethylsiloxane using the Membrane Transfer Technique," J. Micromech. Microeng., Vol. 10, No. 3, pp. 415-420.
Wang, Y.-C., Choi, M. H. and Han, J., 2004, "Two-Dimensional Protein Separation with Advanced Sample and Buffer Isolation using Microfluidic Valves," Anal. Chem., Vol. 76, No. 15, pp. 4426-4431.
Lee, S., Jeong, W. and Beebe, D. J., 2003, "Microfluidic Valve with Cored Glass Microneedle for Microinjection," Lab Chip, Vol. 3, No. 3, pp. 164-167.
Ren, X., Bachman, M., Sims, C., Li, G. P. and Allbritton, N., 2001, "Electroosmotic Properties of Microfluidic Channels Composed of Poly(dimethylsiloxane)," J. Chromatogr. B, Biomed. Sci. Appl., Vol. 762, No. 2, pp. 117-125.
Hu, S., Ren, X., Bachman, M., Sims, C. E., Li, G. P. and Allbritton, N., 2002, "Surface Modification of Poly(dimethylsiloxane) Microfluidic Devices by Ultraviolet Polymer Grafting," Anal. Chem., Vol. 74, No. 16, pp. 4117-4123.
Wolfe, K. A., Breadmore, M. C., Ferrance, J. P., Power, M. E., Conroy, J. F., Norris, P. M. and Landers, J. P., 2002, "Toward a Microchip-Based Solid-Phase Extraction Method for Isolation of Nucleic Acids," Electrophoresis, Vol. 23, No. 5, pp. 727-733.
Harrison, D. J., Fluri, K., Seiler, K., Fan, Z., Effenhauser, C. S. and Manz, A., 1993, Micromachining a Miniaturized Capillary Electrophoresis-Based Chemical Analysis System on a Chip," Science, Vol. 261, No. 5123, pp. 895-897.
Giordano, B. C., Couch, A. J., Ferrance, J. P. and Landers, J. P., 2004, "Microchip Laser-Induced Fluorescence Detection of Proteins at Submicrogram per Milliliter Levels Mediated by Dynamic Labeling under Pseudonative Conditions," Anal. Chem., Vol. 76, No. 16, pp. 4705-4714.
Huhmer, A. F. R. and Landers, J. P., 2000, "Noncontact Infrared-Mediated Thermocycling for Effective Polymerase Chain Reaction Amplification of DNA in Nanolither Volumes," Anal. Chem, Vol 72, No. 21, pp, 5507-5512.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.