최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.19 no.1 = no.115, 2010년, pp.25 - 31
김동규 (한국과학기술원 기계공학과 대학원) , 정경환 (한국과학기술원 기계공학과 대학원) , 강성훈 (한국기계연구원 부설 재료연구소) , 임용택 (한국과학기술원 기계공학과)
To achieve desired microstructure and mechanical property of a manufacturing product, heat treatment process is applied as a secondary process after forging. Especially, quenching process is used for improving strength, hardness, and wear resistance since phase transformation occurs owing to rapid h...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
열처리는 어떤 기술인가? | 열처리는 금속에 원하는 기계적, 물리적, 화학적 성질을 부여할 목적으로 가열과 냉각을 여러 형태로 조합시키는 기술로 열처리 시에 대부분의 금속은 상변태를 수반한다. 상변태를 수반하고 대표적으로 널리 쓰이는 열처리 공정 중에는 최종 제품의 경도, 인장력, 표면강도를 증가시킬 목적으로 행해지는 담금질이 있다. | |
열처리시 대부분의 금속을 무엇을 수반하는가? | 열처리는 금속에 원하는 기계적, 물리적, 화학적 성질을 부여할 목적으로 가열과 냉각을 여러 형태로 조합시키는 기술로 열처리 시에 대부분의 금속은 상변태를 수반한다. 상변태를 수반하고 대표적으로 널리 쓰이는 열처리 공정 중에는 최종 제품의 경도, 인장력, 표면강도를 증가시킬 목적으로 행해지는 담금질이 있다. | |
탄소강이 담금질 공정 동안 수반하는 상변화에 따라 어떤 조직들이 얻어지는가? | 탄소강은 담금질 공정 동안 온도 이력에 따른 상변화를 반드시 수반한다. 즉, 오스테나이트 조직으로부터 탄소함유량이나 냉각조건에 따라 페라이트, 펄라이트, 마르텐사이트 등의 다양한 조직이 얻어진다. |
S. H. Kang, Y. T. Im, 2005, Three-dimensional finite-element analysis of the quenching process of plain-carbon steel with phase transformation, Metall. Mater. Trans. A, Vol. 36, pp. 2315-2325.
S. H. Kang, Y. T. Im, 2007, Finite element investigation of multi-phase transformation within carburized carbon steel, J. Mater. Process. Technol., Vol. 183, pp. 241-248.
S. H. Kang, Y. T. Im, 2007, Three-dimensional thermo-elastic-plastic finite element modeling of quenching process of plain-carbon steel in couple with phase transformation, Int. J. Mech. Sci., Vol. 49, pp. 423-439.
P. R. Woodard, S. Chandrasekar, H. T. Y. Yang, 1999, Analysis of temperature and microstructure in the quenching of steel cylinders, Metall. Mater. Trans. B, Vol. 30, pp. 815-822.
W. A. Johnson, R. F. Mehl, 1939, Reaction kinetics in processes of nucleation and growth, Trans. AIME, Vol. 135, pp. 416-458.
M. Avrami, 1939, Kinetics of phase change I, J. Chem. Phys., Vol. 7, pp. 1103-1112.
E. Scheil, 1935, Anlaufzeit der austenitumwandlung, Arch. Eisenhuttenwes., Vol. 12, pp. 564-567.
D. P. Koistinen, R. E. Marburger, 1959, A general equation prescribing the extent of the austenitemartensite transformation in pure iron-carbon alloys and carbon steels, Acta. Metall., Vol. 7, pp. 59-60.
L. S. Darken, R.W. Gury, 1953, Physical Chemistry of Metals, McGraw-Hill, New York, NY, p. 415.
T. Ericsson, S. Sjostrom, M. Knuuttila, 1983, Predicting Residual Stresses in Cases, D.E. Diesburg, ed., Case Hardened Steels, Metallurgical society of AIME, Warrendale, PA.
E. C. Bain, 1963, Isothermal transformation diagrams, Third ed., United States Steel Corporation, Pittsburgh, PA, USA.
C. A. Siebert, 1977, The hardenability of steels, ASM, Metals Park, OH.
R. D. Manning, H. M. Reichhold, J. M. Hodge, 1967, Transformation and hardenability in steels, Symp. Proc., Climax Molybdenum Company, Ann Arbor, MI.
A. Sugianto, M. Narazaki, M. Kogawara, A. Shirayori, S. Y. Kim, S. Kubota, 2009, Numerical simulation and experimental verification of carburizingquenching process of SCr420H steel helical gear, J. Mater. Process. Technol., Vol. 209, pp. 3597-3609.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.