최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.27 no.11, 2010년, pp.7 - 16
유영태 (조선대학교 메카트로닉스공학과) , 신호준 (조선대학교 레이저가공연구실)
In this study, wire was used as the filler material for the laser repair welding, and the phenomenon in which the supplied filler material was melted and beaded down into the specimen was examined with varying laser powers and welding speeds. The optimal processing condition was found to be the lase...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Sun, Z. and Cuo, M., "Bridging the joint gap with wire feed laser welding," Journal of Materials Processing Technology, Vol. 87, No. 1, pp. 213-222, 1999.
Orabi, A. G., Casalino, G, Benyounis, K. Y. and Hashmi, M. S. J., "An ANN and Taguchi algorithms integrated approach to the optimization of C02 laser welding," Advances in Engineering Software, Vol. 37, No. 10, pp. 643-648, 2006.
Waheed, U. H., Andrew, J. P. and Lin, L., "A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping," Applied Surface Science, Vol. 247, No. 1-4, pp. 268-276, 2005.
Lee, J. H., Suh, M. H. and Han, Y. H., "Laser Cladding," Journal of Korean Welding and Joining Society, Vol. 18, No. 2, pp. 154-162, 2000.
Vedani, M., Previtali, B., Vimercati, G M., Sanvito, A. and Somaschini, G, "Problems in laser-repair welding a surface-treated tool steel," Surface & Coatings Technology, Vol. 201, No. 8, pp. 4518-4519, 2007.
Vedani, M., "Microstructural evolution of tool steels after Nd-YAG laser repair welding," Journal of Materials Science, Vol. 39, No. 1, pp. 241-249, 2004.
Capello, E. and Previtali, B., "The influence of operator skills, process parameters and materials on clad shape in repair using laser cladding by wire," Journal of Materials Processing Technology, Vol. 174, No.1-3, pp. 223-232, 2006.
James, J. O. and Carl, N. W., "Laser Weld Repair of Tantalum Sheet," The Smithsonian/NASA Astrophysics Data System, pp. 924-931 , 1993.
Kim, G S., Oh, Y. K. and Ahn, B. K., "A Characteristics of Heat Affected Zones in Weld Repair for a Damaged CrMoV Turbine Roter Steel," Journal of the Korean Welding and Joining Society, Vol. 14, No. 4, pp. 89-98, 1996.
Shin, H. J., Yoo, Y. T. and Oh, Y. S., "Characteristics of Surface Hardening of Dies steel for Plastic Molding using Continuous Wave Nd:YAG laser," Journal of the Korean Society for Precision Engineering, Vol. 26, No. 1, pp. 71-81, 2009.
John, F. R., "LlA Handbook of Laser Materials Processing," LlA-Magnolia Publishing Inc., p. 402, 2001.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.