최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회지 = Journal of the Korean society of machine tool engineers, v.19 no.6, 2010년, pp.841 - 846
구건섭 (한국폴리텍IV대학 홍성캠퍼스 산업설비자동화과) , 최원용 (주)코아비스 연구개발팀)
The present study examined the mechanical properties of the friction welding with hollow and solid shaft of SM45, of which the diameter is 25.2mm and 33mm. Friction welding was conducted at welding conditions of 2,000rpm, friction pressure of 50MPa, upset pressure of 70MPa, friction time of 0.4sec t...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
경도값을 측정한 Fig. 8은 마찰용접조건(마찰압력 50MPa, 업셋압력 70MPa, 마찰시간 l.Osec, 업셋시간 2.0sec)시 축 방향 절삭깊이 0mm~L0mm까지 0.25mm 등 간격으로 축 방향의 용접단면을 절단가공 후 경도시험편을 제작하여 경도값을 측정한 그래프이며, 측정부위는 용접계면상의 1/2 지점을 0점으로 맞추어 축의 원주방향으로 좌우로 3 mm씩 총 6mm를 각각0.25mm간격으로 측정하였다. 용접면에서 최저경도 값은 절삭깊이 1.
Vill, V. I., 1957, "Friction Welding of Metals," Svarochne Proizvodstvo, Vol. 3, No. 9, pp. 8-23.
Lee. S.-Y. and Yun, B.-S., 2001, "Heat Transfer Analysis of Friction Welding of A2024 to SM45C," J. of KSMTE, Vol. 10, No. 1, pp. 65-70.
Jeong, H.-S., 1997, "Fundamentals and Basic Application of Friction Welding," J. of KWS, Vol. 15, No. 6, pp. 1-12.
Spindler, D. E., 1994, "What Industrial Needs to Know about Friction Welding," Welding Journal, Mar, pp. 37-42.
Nicholas, E. D., 1997, "Where Industry Uses Friction Welding," Welding Design and Fabrication, Aug, pp. 74-76.
Jeong, J.-H., 2001, "A study on the Welding Properties of SM25C Carbon Steel Rod and SMn420 Alloy Steel Pipe," A Thesis for a M.S., Chung-Nam University, Republic of Korea.
Oagawa, K., Yamaguchi, H., Kaga, S., and Sakaguchi, K., 1993, "Optimization of Friction welding Condition for S45C Carbon Steel Using a Statical Technique", Transactions of the Japan Welding Society, Vol. 24, No. 2, pp.133-139.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.