최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.34 no.6=no.297, 2010년, pp.725 - 730
부정정계 배관의 두께 관통 후 파단전누설 거동과 균열개구변위는 정정계 배관과 비교하여 연구 하였다. 부정정 배관은 균열 발생으로 인한 최대 강도의 감소가 비교적 적었다. 부정정 배관계의 파단 전누설 거동은 정정계 배관보다 더 안전 하였다. 균열개구변위는 미관통균열을 가지는 배관에서 균열 관통 후 평가하기 위하여 제안된 소성힌지를 사용하여 평가하였다.
The leak-before-break behavior and the crack opening displacement were investigated of statically indeterminate piping system and statically determinate piping system after a crack penetration. The reduction in the ultimate strength caused by a crack was relatively small in the statically indetermin...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
다중방호설계란 무엇인가? | 원자력플랜트, 고압용기 및 LNG 탱크 등은 매우 높은 안정성이 요구되고 있다. 그 안정성을 보증하고, 중대사고를 방지하기 위한 유용한 개념이 다중방호설계이다. 이 다중방호설계의 개념을 적용한 것이 파단전누설 설계법으로 활발한 연구가 실시되고 있다. | |
부정정 배관의 정정보에 비해 가진 특징은? | 그런데, 실제의 플랜트 배관은 지지부가 존재하고 있기 때문에 부정정이 되는 경우가 많다. 이러한 관점에서 정정 및 부정정 배관의 소성붕괴거동 및 파단전누설 특성에 관한 해석적 연구를 실시하여, 부정정 배관은 정정에 비교하여 파단 전누설에 대한 안정성이 매우 높다는 것을 밝혔다.(4~6) 그러나 실험에 의한 검증은 실시되지 않았다. |
Ahn, S. H., Nam, K. W. Yoo, Y. S., Ando, K., Ji, S. H., Ishiwata, K. and Hasegawa, K., 2002, "Fracture Behavior of Straight Pipe and Elbow with Local Wall Thinning," Nuclear Engineering and Design, Vol. 211, pp. 91-103.
Ahn, S. H., Nam, K. W., Takahashi, K., Ando, K., 2006, “Comparison of Experimental and Finite Element Analytical Results for the Strength and the Deformation of Pipes with Local Wall Thinning Subjected to Bending Moment”, Nuclear Engineering and Design, Vol. 236, pp. 140-155.
Liu, S. P.,Hidaka, A., Kojima, T. and Ando, K., 1996, "Ultimate Strength and Plastic Collapse Behavior of Statically Indeterminate Beams with Crack," JSME. Vol. 62, No. 595, pp. 90-97.
Liu, S. P. and Ando, K., 1996, "Ultimate Strength and Plastic Collapse Behavior of Statically Indeterminate Pipes with Crack and Compliances," JSME. Vol. 62, No. 597, pp. 48-55.
Liu, S. P. and Ando, K., 1996, "Leak Before Break and Plastic Collapse Behavior of Statically Indeterminate Pipe System with Circumferential Crack" , JHPI, Vol. 34, No. 6, pp. 2-10.
Hasegawa, K., Sakata, S., Simizu, T., Shida, S., 1983. Prediction of Fracture Tolerances for Stainless Steel Pipes with Circumferential Cracks. ASME Int. J. Press. Ves. Piping, Vol. 95, pp. 65-78.
Paris, P. C. and Tada, H., 1983, NUREG/CR-3464.
Ahn, S. H., Ando, K., Ishiwata, M. and Hasegawa, K., 1998, "Plastic Collapse Behavior of Pipes with Local Wall Thinning Subjected to Bending Load and Allowable Limit," JHPI. Vol. 36, No. 4, pp. 225-233.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.