최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea, v.23 no.4, 2010년, pp.409 - 415
김민숙 (경희대학교 건축공학과) , 이영학 (경희대학교 건축공학과) , 김희철 (경희대학교 건축공학과)
A finite element model for punching shear of flat plate structures is presented. A parametric study also has been conducted to verification of influence of several parameters in terms of the flexural reinforcement ratio, slab thickness. Reisnner-Mindlin assumptions are adopted to consider of shear d...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
플랫 플레이트 구조에서 응력집중현상이 유발할 수 있는 문제점은? | 그러나 보가 없이 기둥이 슬래브를 직접 지지하는 구조로 슬래브에서 기둥으로 전달되는 하중으로 인해 기둥 주위의 위험단면에 국부적인 응력집중현상이 발생한다. 이러한 응력집중현상은 뚫림전단을 유발한다. 이는 매우 취성적이며 구조물의 연쇄붕괴로 이어질 수 있기 때문에 국내외 연구자들에 의해 뚫림전단의 파괴매커니즘 및 전단강도 산정식, 전단보강법 등에 대한 연구가 지속적으로 수행되고 있다(최명신 등, 2005; Elstner 등, 1956; Moe, 1961; Polak, 2005; Muttoni, 2008). | |
플랫 플레이트 구조의 특징은? | 플랫 플레이트 구조는 층고절감 및 거푸집 작업의 단축으로 인한 공기절감 등 경제성 및 시공성에 있어서 매우 유리한 구조 시스템이다. 그러나 보가 없이 기둥이 슬래브를 직접 지지하는 구조로 슬래브에서 기둥으로 전달되는 하중으로 인해 기둥 주위의 위험단면에 국부적인 응력집중현상이 발생한다. |
최명신, 안종문, 이광수, 신성우 (2005) 플랫 플레이트 슬래브-내부기둥 접합부의 뚫림전단강도에 대한 기둥 형상비의 영향, 대한건축학회 논문집, 21(10), pp.79-86.
ACI Committee 318 (2008) Building Code Requirements for Structural Concrete(ACI 318-08) and Commentary, American Concrete Institute, Farmington Hills, MI, pp.465.
Albrecht, U. (2002) Design of Flat Slabs for Punching- European and North American Practices, Cement & Concrete Composites, 24, pp.531-538.
Alexander, S.D.B., Simmonds, S.H. (1992) Tests Column-Flat Plate Connections, ACI Structural Journal, 893(5), pp.495-502.
Collins, M.P., Porasz, A. (1989) Shear Strength for High Strength Concrete, Bulletin D' Information, Design Aspects of High Strnegth Concrete, CEB, 193, pp.75-83.
Elstner, R.C., Hognestad, E. (1956) Shearing Strength of Reinforced Concrete Slabs, ACI Structural Journal, Proceedings, 53(2), pp.29-58.
Izumo, J., Shin, H., Maekawa, K., Okamura, H. (1992) An Analytical Model for RC Pannel Subjected to In-Plane Stress Concrete shear in Earthquake, Elsevier Applied Science, London and New York, pp.206-215.
Izumo, J., Shin, H., Maekawa, K., Okamura, H. (1992) An Analytical Model for RC Pannel Subjected to In-Plane Stress Concrete shear in Earthquake, Elsevier Applied Science, London and New York, pp.206-215.
Moe, J (1961) Shearing Strength of Reinforced Concrete Slabs and Footings under Concentrated Loads, Bulletin D45, Portland Cement Association, Skokie, pp.144.
Muttoni, A. (2008) Punching Shear Strength of Reinforced Concrete Slabs without Transverse Reinforcement, ACI Structural Journal, 105(4), pp.440-450.
Polak, M.A. (2005) Punching Shear in Reinforced Concrete Slabs, SP-232, American Concrete Institute, Farmington Hills, MI, pp.465.
Polak, M.A. (2005) Shell Finite Element Analysis of Reinforced Concrete Plates Supported on Column, Engineering Computations : International Journal of Computer Aided Engineering and Software, in press.
Reissner, E. (1945) The Effect of Transverse Shear Deformation on the Bending of Elastic Plate, ASME, Journal of Applied Mechanics, 12, pp.69-77.
Thorenfeldt, E., Tomaszewicz, A., Jensen, J.J. (1987) Mechanical Properties of High Strnegth Concrete and Application in Design, Proceedings of the Symposium Utilization of High Strength Concrete, Stavanger, Norway, Tapir Trondheim.
Vaini?nas, P., Popovas, V., Jarmolajev (2002) A. Punching Shear Behavior Analysis of RC Flat Floor Slab-to-Column Connection, Journal of Civil Engineering and Management, 8(2), pp.77-82.
Yamada, T., Nanni, A., Endo, K. (1992) Punching Shear Resistance of Flat Slabs: Influence of Reinforcement Type and Ratio, ACI Structural Journal, 89(5), pp.555-563.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.